Login | View Cart | Become a Customer | 800.949.7079 |
Product image of Telewave TWNC-1005-2 88-108 MHz Dual Notch Cavity 5

Telewave | TWNC-1005-2 88-108 MHz Dual Notch Cavity 5" Dia.

Item #TELTWNC-1005-2
Suggested Retail: $1,032.06
Quantity: 
Add To Cart Request QuoteShare Info
NOTCH CAVITIES FOR FM BROADCAST
Data Sheet Icon
The Telewave TWNC-1005-2 is 5" diameter, 1/4-wavelength notch cavities with an adjustable coupling loop. Notch cavities are typically used to eliminate a particular frequency, with very low loss outside the notch band. Telewave can also "tilt" the notch response to move a notch very close to a pass frequency without adversely affecting the pass response.
TWNC-1005-2 cavities cover 88-108 MHz, and can be tuned at 50 or 75 ohms upon request. All cavities are tuned to specified frequencies prior to shipping, and no further adjustments should be required. The positive locking mechanism allows for quick field re-tuning if frequency changes become necessary. These cavities feature calibrated adjustable coupling, which can be easily changed to improve notch depth. This allows cavity response to be optimized for any operating environment.At densely populated sites, the TWNC-1005-2 dual cavity filter provides a deeper notch with minimum insertion loss. Multiple cavities can also provide a wider passband when required. Mounting rails are provided for all multiplecavity filters.
Excellent frequency stability is achieved by the use of a specially machined compensator and Invar rod. The notch frequency is temperature stable from -30°C to +70°C. Telewave Ground Loop technology places the center conductor of each coupling loop at DC ground potential for lightning protection and noise reduction.
Heavy duty materials are used throughout each cavity to insure high performance and long life. Cavity top plates are machined from ¼ -inch aluminum, and are heliarc welded to the cavity body at the high current point for improved conductivity and strength.
This allows Telewave cavities to handle up to 350 watts, depending on insertion loss.Rigid foam inserts support the tuner assembly allowing vertical or horizontal mounting. Similar metals and alodined aluminum help prevent galvanic corrosion. Silver plated tuners and beryllium copper finger stock provide non-corrosive low loss contact, and ensure reliable, long-term performance.
General Specifications
Tuning frequency range88-108 MHz
Nominal Impedance50Ω
Input power (max) 350 watts
Inner conductor, coupling loopsSilver plated copper
ConnectorsN or UHF female (opt.)
Model Specifications
Insertion loss (max)0.4 dB
Maximum dimensions with tuners extended in. (cm)5.25 x 19 x 46 (13 x 48 x 117)
Shipping Weight16Lbs
Temperature range-30°C to +70°C
Cavity electrical length1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Tuning rodInvar
Contactors, fingerstockBeryllium copper
Weight16 lbs