The Telewave ANT450Y10-WR is a high performance directional antenna, designed especially for point to point as well as point to multipointapplications. This antenna produces 10 dBd forward gain with anexcellent front-to-back ratio. Solid aluminum elements with 360°welds provide exceptional strength and prevent intermodulation. Eachantenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain andwind blown abrasives such as desert sand. The feed line is protectedwithin the boom, and the radiating element is completely sealedagainst ice and other environmental hazards with a tough, RFtransparent radome. The ANT450Y7-WR includes a welded vertical plateand mast clamp set. A horizontal plate is optional. The clamp setsecures the antenna to a vertical mast or tower support from 1.5" -3.5" O.D. For installations on angled supports, the "U" mountprovides 3 separate planes of rotation to allow almost any requiredorientation of the antenna. The "U" mount attaches to virtually allsupports up to 3.5" in diameter, and can be adapted to flat surfacesand utility poles.

450-470 MHZ 3-ELEMENT 7.1 DB GOLD ANODIZED YAGI ANTENNA N-FEMALE

450-470 MHZ 3-ELEMENT 7.1 DB SILVER SERIES YAGI ANTENNA N/F

***Minimum purchase required of 4pcs per order***

450-470 MHZ, 300 WATT, 10 DBD 7-ELEMENT HD YAGI, DIRECT-N

450-470 MHZ, 300 WATT, 6 DBD, 3 ELEMENT HD YAGI, DIRECT N

Features:

Highly directional coverage and good front­to­back ratio

Rugged, reliable design

Stacked arrays

The Telewave ANT450Y7-WR is a high performance directional antenna,designed especially for point to point as well as point to multipointapplications. This antenna produces 7 dBd forward gain with anexcellent front-to-back ratio.
Solid aluminum elements with 360° welds provide exceptional strength and prevent intermodulation. Each antenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and wind blown abrasives such as desert sand. The feed line is protected within the boom, and the radiating element is completely sealed against ice and other environmental hazards with a tough, RF-transparent radome.
The ANT450Y7-WR includes a welded vertical plate and mast clamp set. A horizontal plate is optional. The clamp set secures the antenna to a vertical mast or tower support from 1.5" - 3.5" O.D. For installations on angled supports, the "U" mount provides 3 separate planes of rotation to allow almost any required orientation of the antenna. The "U" mount attaches to virtually all supports up to 3.5" in diameter, and can be adapted to flat surfaces and utility poles.