Product image of DuraComm Corporation SDR-120-12 Mean Well Power Supply 120vac 12vdc 10a din rail mount

DuraComm Corporation | SDR-120-12 Mean Well Power Supply 120vac 12vdc 10a din rail mount

Item #DURSDR-120-12

Features:
  • High efficiency 91% and low power dissipation
  • 150% peak load capability
  • Built-in active PFC function, PF>0.93
  • Protections: Short circuit/ Overload/ Over volatage/Overtemperature
  • Colling by free air convection,
  • Can be installed in DIN rail TS-35/7.5 or 15
  • UL 508 (industrial control equipment) approved
  • EN61000-6-2(EN50082-2) industrial immunity level
  • Built-in DC Ok relay contact
  • 100% full load burn-in test


  • Suggested Retail: $133.99
    Quantity: 
    Add To Cart Request Quote
    120W Single Output Industrial DIN RAIL with PFC Function
    Output
    DC Voltage12V
    Rated Current10A
    Current Range0~10A
    Rated Power120W
    Peak Current180W (3 sec.) (See Spec Sheet)
    Ripple and Noise100mVp-p Max.
    Voltage Adj. Range12~14V
    Voltage Tolerance±1.0%
    Line Regulation±0.5%
    Load Regulation±1.0%
    Setup, Rise Time1500ms, 60ms/230VAC
    3000ms, 60ms/115VAC at full load
    Hold Up Time20ms/230VAC
    20ms/115VAC at full load
    Input
    Voltage Range88 ~ 264VAC
    124 ~ 370VDC (See spec sheet)
    Frequency Range47 ~ 63 Hz
    Power Factor (Typ.)0.93/230VAC
    0.96/115VAC at full load
    Efficiency89% (Typ.)
    AC Current (Typ.)1.4A/115VAC
    0.7A/230VAC
    Leakage Current<1mA / 240VAC
    Protection
    OverloadNormally works within 110~150% rated output power for more than 3 seconds and then shut down o/p voltage
    >150% rated power, constant current limiting with auto-recovery within 3 seconds and shut down o/p voltage after 3 seconds
    Over Voltage14 ~ 17V
    Protection type : Shut down o/p voltage, re-power on to recover
    Over TemperatureShut down o/p voltage, recovers automatically after temperature goes down
    Function
    DC OK Realy Contact Ratings60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load (Max.)
    Environment
    Working Temp.-25 ~ +70 (Refer to "Derating Curve")
    Working Humidity20 ~ 95% RH non-condensing
    Storage Temp.,Humidity-40 ~ +85 , 10 ~ 95% RH
    Temp Coefficient±0.03%/ (0 ~ 50 )
    VibrationComponent:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
    Safety @ EMC
    See Spec Sheet)
    Safety StandardsUL508, TUV EN60950-1 approved ; (meet EN60204-1)
    Withstand VoltageI/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC
    Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25 / 70% RH
    EMC EmissionCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
    EMC ImmunityCompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A, SEMI F47, GL approved
    Others
    MTBF289.9K hrs min. MIL-HDBK-217F (25 )
    Dimension1.6"W x 4.9"H x 4.5"D | 40 x 125.2 x 113.5mm
    Weight1.5 Lbs | 0.67 Kg

    Accessories

    BRNYAZV10TC14
    Burndy
    #10 AWG Lug One 1/4" Hole, Long Barrel, Windowed
    Suggested Retail: $3.50
    Qty: 
    BRNYAZV10-2TC14
    Burndy
    #10-14 AWG 2 Hole Lug, 1/4" Stud, 5/8" Spc, Long Brrl IW=Y
    Suggested Retail: $6.61
    Qty: 
    INFMT-5810-R
    Republic Wire
    #10 AWG THHN Red Jacket Stranded Ground Wire
    Suggested Retail: $1.21
    Qty: 
    INFMT-5810-B
    Republic Wire
    #10 AWG THHN Black Jacket Stranded Ground Wire
    Suggested Retail: $1.21
    Qty: 
    INFMT-5812-R
    Republic Wire
    #12 AWG THHN Red Jacket Stranded Ground Wire
    THHN Copper Conductor
    Suggested Retail: $0.76
    Qty: 
    INFMT-5812-B
    Republic Wire
    #12 AWG THHN Black Jacket Stranded Ground Wire
    THHN Copper Conductor
    Suggested Retail: $0.76
    Qty: 

    Substitutes

    NEWDIN-UPS-48-10
    Newmar
    DIN Rail UPS, 48Vdc 10 Amps, 115/230 VAC In
    DIN Rail UPS.
    Suggested Retail: $1059.00
    Qty: