Login | View Cart | Become a Customer | 800.949.7079 |
3-5 psi 19" Rack Mt Low Press. Membrane Dehydrator 115/230Vac
Item #ANDMT050B-81315
Suggested Retail: $3,281.00
Add To Cart Request QuoteShare Info
DryLine® Dehydrator, Low-pressure membrane, 19 in rack mountable, 3.0 psig, with summary alarm, 115 Vac, 50/60 Hz

See related products for dc options, sold separately

  • 3/8 in polyethylene tubing
  • 90° elbow fitting
  • Instruction sheet
  • Male connector fitting
  • Needle valve
  • Power cord
  • Power cord connector lock
  • PTFE tape
  • Screws

  • Related Products

    This addition to the family of DryLine pressurization equipment provides the industry with a fully automatic dehydrator with an expanded range that covers systems with volumes from 0.01 to 1700 liters (0.01 to 60 cubic feet). Low and medium volume cellular, broadcast, and microwave systems now can be pressurized with equipment that functions without the need for bypass kits and ancillary air tanks. The MT050B offers operational reliability, a technologically advanced drying mechanism, easy installation and a warranty that is the best in the business.

    The MT050B is a superior alternative to bottled nitrogen gas and desiccant dehydrators, especially at remote sites. The unit minimizes the maintenance associated with nitrogen tanks and manually regenerative systems. The MT050B uses automatic pressure sensing and microprocessor control to activate and deactivate an air compressor, operating only when needed to maintain pressure in an internal reservoir tank, improving efficiency for reduced wear and maintenance.

    The MT050B features an Electronic Compressor Control Module that incorporates precise pressure sensing with microprocessor control circuitry to control compressor cycles and provide system monitoring.

    DryLine equipment offers the best performance available in any type of dehydrator. Moisture is separated from the air stream and vented to the outside. The simplicity in the membrane cartridge design eliminates the parts required for pressure swing or heat regenerative dehydration. Our three-year/3,000 hour warranty assures your dehydrator will operate more dependably than any other unit in its class. The unit also features reduced noise and minimum vibration. This membrane is designed to operate at lower pressure to increasing compressor life up to 100% over the older high pressure membrane units.

    The MT050B is designed to mount in an equipment rack, set on a shelf, or on the floor. The MT050B provides front access for the maintenance and operational controls. Power, air, and alarm connections of the MT050B are accessible from the rear of the cabinet.

    Standard Alarms The MT050B includes a low-pressure alarm, excess run alarm, and power fail alarm. The standard alarm package provides a single contact closure for the three alarms, functioning as a summary alarm, as well as discrete contacts for each alarm. An approved terminal block is provided for the alarm outputs. Electrical Connections Units designed for use throughout the world. The ac input is auto detecting and the compressor is rated for both frequency operations. Units are equipped with a UL/CSA cord set and with a CE harmonized cord with stripped leads for attachment of a local country plug.

    Front mounted controls and status indicators include:
  • Digital LCD display for alarm and system status
  • Dual display modes for system status and last event
  • Compressor run-time alarm

  • BrandDryLine®
    Operating Temperature-10°C to +50 °C (+14°F to +122°F)
    Mount TypeFloor | Rack | Shelf
    Voltage115 Vac 10%
    Port Type3/8 in PE tube
    Rack TypeEIA 19 in
    Alarm TypeDescrete
    Excess-Run Alarm10 minutes, factory set
    Low-Pressure Alarm68 mbar | 7 kPa | 1 psig
    Net Weight35.4 lb | 16.0 kg
    Product Depth16.5 in | 419.1 mm
    Product Height6.80 in | 172.7 mm
    Product Width17.3 in | 439.4 mm
    Gross Weight, Packed39.1 lb | 17.7 kg
    Product Depth, Packed21.3 in | 541.0 mm
    Product Height, Packed12.3 in | 312.4 mm
    Product Width, Packed19.8 in | 502.9 mm
    Electrical Specifications
    Power CordUSA power cord | Europe power cord with stripped leads
    Alarm Contact RatingForm C dry contacts, 2 amps at 30 Vdc
    Power Consumption, average190.0 W
    Power Frequency60/50 Hz
    Power PhaseSingle
    Suggested Circuit Breaker Size20 A
    Circuit Breaker RequirementElectrical connections require separate circuits for dehydrator installation
    General Specifications
    Dehydrator TypeAutomatic Membrane
    Voltage Typeac
    Volume Capacity, minimum0.0 ft³ | 0.0 L
    Volume Capacity, maximum60.0 ft³ | 1699.0 L
    Flow Rate, nominal3.40 SLPM | 0.12 SCFM
    Port Count1
    Rack Units4
    Regulated Output Pressure, maximum21.0 kPa | 3.0 psig
    Regulated Output Pressure Typefactory set
    Power-Fail AlarmLoss of Input Power
    High-Humidity Alarm7.5% RH, factory set
    ANDAE01K-D0840-100 100 Ft Roll 3/8" Black Polyethylene Tubing
    Suggested Retail: $35.00