Product image of CommScope ATM200-A20 Teletilt Actuator Factory set to AISG 2.0 Mode

CommScope | ATM200-A20 Teletilt Actuator Factory set to AISG 2.0 Mode

Item #ANDATM200-A20
Suggested Retail: $540.00
Add To Cart Request QuoteShare Info
Connects to the Base Station Antenna for Remote Electrical Tilt
Data Sheet Icon
This AISG compliant Teletilt RET actuator enables operators to remotely change the electrical downtilt of an antenna. The ATM200-A20 is shipped in AISG 2.0 mode. In the field, the actuator can be set to AISG 1.1 or 2.0 as needed. The actuator's absolute position sensor eliminates the need for calibration, enhances precision and prevents dropped calls caused by calibration sweeps. Male and female AISG connectors facilitate daisy chaining actuators. As many as 32 actuators can be attached to a single control line. This actuator is equipped with a flashing LED, which indicates data transfer and tilt movements. It comes in a weather resistant gasket-sealed container that has a drain hole to permit drainage of condensed moisture. The ATM200-A20 actuator can be field fitted onto Andrew Teletilt remote electrical downtilt (RET) compatible antennas that are already in service or factory fitted before delivery to the field. The part number for antennas with a factory-fit ATM200-A20 actuator ends in -AxM, with x referring to the number of the attached actuators (either -A1M or -A2M).
Material TypeABS
Electrical Specifications
ProtocolAISG 1.1 | AISG 2.0
Default ProtocolAISG 2.0
Interface Protocol SignalData | dc
Input Voltage10-30 Vdc
Adjustment Cycles, Min10000
Adjustment Time, Full range, Max22 seconds
Electrical Safety StandardEN 60950 | UL 60950
Mechanical Specifications
AISG Input Connector8-pin DIN Male
AISG Input Connector Quantity1
AISG Output Connector8-pin DIN Female
AISG Output Connector Quantity1
Weight0.53 lbs