The Samlex EVO-4248SP is a Split Phase Pure Sine Wave Inverter, Adaptive Battery Charger and Two-Input Transfer Relay - All in ONE unit.

This 4200-Watt, low frequency, 120V/240V split phase inverter/charger connects into a standard electrical household panel. When you combine it with a 48V battery bank and a solar system you can run a fully equipped off-grid cabin, a remote mobile construction site, or use it as an emergency backup system.

Intelligently integrates a 60 Amp, 4-stage Battery Charger and a 40 Amp Transfer Relay into an advanced and affordable off-grid power solution. For use with AGM, GEL, and Flooded Lead Acid or Lithium-ion batteries.

The EVO-4248SP Inverter/Charger is CSA Listed and conforms to CAN/CSA STD. C22.2 No. 107.1-16 and UL Std No. 1741 2nd Ed., and are EMI/EMC compliant with FCC Part 15(B), Class A.

The Samlex EVO4248SP provides reliable AC power wherever it’s needed and is designed for use with alternative energy, off-grid, cabins, remote locations, and areas with unreliable utility power, as well as back-up and emergency power applications. With superior protection features, input for a solar charge controller, and a high surge rating you can experience the Evolution.

The ICT300-48SNV inverter is designed specifically for communications site applications. Whether your communications site is off the grid, or designed to operate from DC power for uninterrupted quality of service, certain components still require high quality, reliable AC sine wave power to operate.

ICT Site Inverters are low profile, high performance sine-wave inverter that converts DC energy from your battery source into 300 watts of utility grade power for site equipment that requires AC electricity, such as radio links, multiplexers, routers, or digital video recorders. ICT inverters provide extremely low harmonic distortion and high efficiency, meaning that your equipment receives extremely quiet, high quality power.

Up to three ICT Site Inverters can be mounted in a single 1RU 19 inch rack shelf, to provide almost 1kW of power and six AC outlets in an ultra-compact, space saving design.

The ICT Sine Wave Series features 93% peak efficiency, ultra-low noise, and low idle current draw to preserve battery life. The robust design will operate at 3000 watts of output for 2 seconds in order to start demanding loads. With two AC outlets on the front as well as AC hardwire points on the back, the Sine Wave Series is adaptable to various types of installation requirements, whether standalone or rack mounted. Both the standard Form C alarm contacts and optional TCP/IP Ethernet connection can be used to send a remote alarm signal for any type of fault, ideal for remote installations where the site is not easily accessible. The Ethernet option allows remote power-cycling of connected loads, possibly saving a call-out to the site.

Protection Features:

Automatic Overload Protection

Resettable 15A Circuit Breaker

Over Temperature Shutdown

Remote Alarm Form C Contacts

The 1U, 1200 watt, power inverter series provides seamless back-uppower for AC powered communications equipment from the site's 24 or48V DC battery system. A fast-acting transfer switch ensures voiceand data transmissions remain uninterrupted in the event of a powergrid failure or if the site utility power is disconnected formaintenance and upgrade purposes. Built in a compact 1U case for19" rack installations.

Features

• Built-in 16A automatic transfer switch
• On-Line and Off-Line modes
• Load Safe algorithm
• Flexible configurable parameters
• Configurable via front panel, USB, or RS-232C
• Ethernet webpage monitoring
• SNMP Alarm Trap generation for NOC monitoring
• 19", Rackmount, 1U

The EVO-RC-PLUS is intelligent remote control designed specifically for use with Samlex EvolutionTM F Series of Inverter/Chargers.

View real-time activity on the alpha numeric LDC display with 4 rows of 20 character while the unit is operating: Output voltage, Frequency, Amps, Watts, Volt Amps, Power Factor, Battery Voltage, Battery Current, Solar Input Current and more.

Features

• Advanced features for programming various parameters and modes of operation
• 4 rows of 20 characters alpha numeric LCD display for messaging
• Robust metal enclosure
• SD card slot can manage a removable SD Card up to 16GB (SD Card not included)
• Includes 10M/33ft data cable

LCD Remote Control for NTX Inverter

Design Features

Mountable remote control panel included with NTX Series 1000, 1500, 2000 and 3000 Watt inverters

Informative LCD display indicates:

-Battery voltage

-Output power (bar graph)

-Input fault

-Output fault

Use the control panel for remote operation and convenient status monitoring.

Comes with 16' cable.

Features

Program various parameters and modes of operation

Provides real time and data logged performance details

SD Card Slot (accepts SD Card up to 16GB) to record data

Indicates the status of Inverter & Charging Modes

Power ON/OFF, or switch to Standby Mode

Includes 33 ft of RJ-45 data cable