The Extreme Weather RET assembly is an integrated design where theconnector and the cable are fused into one assembly, making thissolution highly resistant to moisture, contamination, andcorrosion.

• The ONLY IP 68 rated RET connector available today
• A fused gasket sealed body will eliminate the chance of moisturerunning down the cable and seeping into the connector
• Gasket encapsulated contacts and gasket sealed mating face willeliminate the chance of moisture seeping into the connector

Kaelus world-proven outdoor solutions provide strong RFperformancecoupled with rugged operation. The DBC0062 combines AWS, 1900,WCS and 2600 bands onto a single feeder and provided the followingfeatures:

• AWS 3 and AWS 4 ready
• Enables feeder sharing of various technologies
• Low insertion loss and high isolation
• Field configurable DC switch.
• Low passive IM performance

The Kaelus DBC0114 is a bi-directional Diplexer, designed to combine or split 1900 and AWS/WCS bands. The DBC0114 provides low insertion loss and high return loss with excellent passive inter-modulationperformance in an extremely small and lightweight IP67 capablepackage

• Enables antenna sharing for 1900 and AWS/WCS networks
• AWS-3 ready
• Offers low insertion loss
• Low passive IM performance
• Wall or mast mounting
• Single and twin models available

Designed to combine two 1900MHz base stations, the Kaelus DBC0099provides a low loss combiner with excellent insertion loss andpassiveinter-modulation performance.

• Combines two 1900MHz BTS onto a single feeder without guardband
• Designed for low passive inter-modulation
• DC/AISG bypass field settable
• Very low insertion loss

The Extreme Weather RET assembly is an integrated design where theconnector and the cable are fused into one assembly, making thissolution highly resistant to moisture, contamination, andcorrosion.

• The ONLY IP 68 rated RET connector available today
• A fused gasket sealed body will eliminate the chance of moisturerunning down the cable and seeping into the connector.
• Gasket encapsulated contacts and gasket sealed mating face willeliminate the chance of moisture seeping into the connector.

Designed to be deployed in 2300MHz WCS Band, the Kaelus TMA2104provides gain at the 2300MHz uplink band while allowing 700/850services to pass through to the antenna. This saves OPEX, CAPEX and gives excellent system performance as well as full AISGcapabilities.

• Improved base station sensitivity through gain in 2300 MHz bands
• Hardware and software configuration using AISG "Personality"upload
• High linearity and low noise performance
• Fail safe bypass mode with lightning protection
• bypass provided for 700/850 MHz services

The Extreme Weather RET assembly is an integrated design where theconnector and the cable are fused into one assembly, making thissolution highly resistant to moisture, contamination, andcorrosion.

• The ONLY IP 68 rated RET connector available today
• A fused gasket sealed body will eliminate the chance of moisturerunning down the cable and seeping into the connector.
• Gasket encapsulated contacts and gasket sealed mating face willeliminate the chance of moisture seeping into the connector.

The KA-6008-8031 rejects interference in the SatelliteCommunication Band (3820-3980MHz) band while passing 3700-3760MHz(A1/A2/A3 Block). Capable of being used in an outdoor environment,the KA-6008-8031 contains eight identical filters, suitable for 8x8MIMO configuration, offering excellent insertion loss andrejection.

• Low insertion loss
• Outdoor and indoor configurations
• 8 in, 8 out configuration suitable for 8x8 MIMOconfiguration
• Available as a tunable version: KA-6008-8433

The KA-6008-8433 is an interference mitigation filter tunable to two different positions: when set to position one, it rejects interference in the Satellite Communication Band (3820-3980MHz) band while passing 3700-3760MHz (A1/A2/A3 Block). When the Satellite Communication Band is vacated, the filter can be reconfigured to position two to pass 3700-3980MHz (A, B and C block). The change of configuration can be performed remotely via AISG. Capable of being used in an outdoor environment, the KA-6008-8433 contains eight identical filters, suitable for 8x8 MIMO configuration, offering excellent insertion loss and rejection.

• Remote tunable filter set to 2 positions: position one, passing A1/A2/A3 block only, mitigates interference in the Satellite Communication band and position two allows the full 3.7GHz (A, B and C block) spectrum use, once the Satellite Communication band has been vacated.
• Low insertion loss
• Outdoor and indoor configurations
• 8 in, 8 out configuration suitable for 8x8 MIMO configuration

The Extreme Weather RET assembly is an integrated design where theconnector and the cable are fused into one assembly, making thissolution highly resistant to moisture, contamination, andcorrosion.

• The ONLY IP 68 rated RET connector available today
• A fused gasket sealed body will eliminate the chance of moisturerunning down the cable and seeping into the connector.
• Gasket encapsulated contacts and gasket sealed mating face willeliminate the chance of moisture seeping into the connector.

The iWA series Cable & Antenna Analyzer is the evolution of Kaeluswell respected and very reliable iVA platform. The iWA extendedfrequency range to 4GHz supports Land Mobile Radio (LMR) and 5Gmidband networks while enabling users to accurately measure andlocate VSWR/return loss faults in their RF infrastructure. Inaddition, the Bluetooth wireless connectivity allows unprecedentedmeasurement flexibility. The iWA is an ergonomically designed, ruggedbattery-operated module that is remotely controlled with any tablet,smartphone or laptop computer.

• Redefining site certification sweep testing, dramaticallyreducing test time on site
• Simple to operate, highly intuitive software user interface withthe unique ability to generate and complete the test report onsitewith no post-processing or additional data entry required
• Kaelus Unify software available for Android, iOS and Windowsallows Kaelus iPA(s) and iWA(s) to combine your RL data with your PIMdata into a single report.
• Geotag each test point, insert a Google Maps® snapshot directlyinto the report
• Instrument controlled via robust Bluetooth connection.
• Connect directly to the device under test; eliminates the needfor a phase stable cable in most cases.