DuraComm Corporation

Din mount dual ATC-ATO fused distribution panel. The DIN-10-75 hasten positions at 20 Amps maximum per fuse. Has negative and positivebust bar for efficient power distribution for maximum current of 75Amps.

Features:

Access power for 10 outputs

For 12, 24, and 48 volts DC Systems

Up to 20 Amps per fuse / 75 Amps Max

Includes dual (Neg/Pos) input terminals oneach parallel "add-on" capability

Can be installed on DIN RailTS-35/7.5 or 15

Requires ATC/ATO blades fuses (notincluded)

The DBRM-10-75 is a 2RU rack mount 10 position fused DC powerdistribution panel designed to use standard ATC/ATO fuses. This powerdistribution panel is built for up to 20 Amps maximum per fuse for amaximum current of 75 Amps per panel.

The BCR-1000-12 is a 2RU intelligent rack mount battery charger forlead-acid batteries. It comes with built-in Active Power FactorCorrection and is microprocessor controlled. The BCR acceptsUniversal Input Voltage from 90 - 264 VAC and provides a front panelmounted analog meter for display of voltage and current amperage. TheBCR Series also comes with three layers of protection short circuit,over load, over voltage, and over temperature protection.

The DP-20GMT-48N is a 1RU rack mount 20 position fused powerdistribution panel designed to use standard GMT ( Grasshopper Madefor Telecom) Fuses. The DP-20GMT-48N provides front panel LED's toprovide a visual indication of a fuse open condition and also DCpower present. In addition Form C relay contacts provide a remotefuse fail indication. This power distribution panel is built for upto 15 Amps per fuse and 100 Amps per unit.. This model is builtspecifically for Positive GND installation.

The DP-20GMT-12 is a 1RU rack mount 20 position fused powerdistribution panel designed to use standard GMT ( Grasshopper Madefor Telecom) Fuses. The DP-20GMT-12 provides front panel LED's toprovide a visual indication of a fuse open condition and also DCpower present. In addition Form C relay contacts provide a remotefuse fail indication. This power distribution panel is built for upto 15 Amps per fuse and 100 Amps per unit.

The DP-20GMT-48 is a 1RU rack mount 20 position fused powerdistribution panel designed to use standard GMT ( Grasshopper Madefor Telecom) Fuses. The DP-20GMT-48 provides front panel LED's toprovide a visual indication of a fuse open condition and also DCpower present. In addition Form C relay contacts provide a remotefuse fail indication. This power distribution panel is built for upto 15 Amps per fuse and 100 Amps per unit.

The RM-1224M is an economical and reliable modular 2U rack mount ACto DC power supply comprised of one module. All RM series powersupplies are wired in a floating ground configuration. This unit alsocomes with four layers of protection short circuit, overload, overvoltage, and over temperature. This unit features a front panelmounted analog meter for display of voltage and current amperage.

The Model BMS-12-75 is a 1RU rack mount complete battery managementsystem for installations, which already have a primary power supply.Smart Charging with Low Voltage Disconnect maintains batteryprotection by preventing battery failures caused by over-charging orexcessively deep discharging. Dual Schottky diodes provide seamlesstransfer to battery when AC power is lost. When AC power is restoredthe unit will auto-revert back to the main AC power and yourbatteries will be recharged.

The RU1-4012 is a 1RU rack mount AC to DC power supply. The RU1series is designed to provided the most power in a small space aspossible. In addition the RU1 series comes with four layers ofprotection short circuit, overload, over voltage, and overtemperature. All RU1 series power supplies are wired in a floatingground configuration.

The SC-24 is a 3 stage smart charger that is designed to provideoptimal battery care and maintenance. It is recommended for use withlead-acid type battery banks from 30 to 60AH. Recommended for usewith lead-acid type battery banks

The RLP-4012 comes with a built-in meter that can monitor voltage andamperage by simply switching the Knob that is located to the right ofthe display (Note: the RLP-4012 can only monitor one input at atime). Along with a metered display the RLP comes with remote senseand remote control. The RLP-4012 has auto ranging input voltage from100 to 260 VAC and comes with four layers of protection shortcircuit, overload, over voltage, and over temperature.

Features:

Power Factor Correction

Auto Ranging Input voltage 100 to 260 VAC

Metering: Voltage / Amperage

Remote Sense / Remote Control

DC-OK TTL signal

Short Circuit / Overload / Over Voltage / Over TemperatureProtection

3 year warranty

The RLP-4012BBSCLVD is a 2RU rack mount Heavy Duty DC power SupplyWith battery backup, Smart Charging and Low Voltage BatteryDisconnect. This unit features a front panel mounted analog meter fordisplay of voltage and current amperage and a manual Batterydisconnect switch for simple battery maintenance while still poweringyour load. Other features include a integrated 120W smart chargerand a Low voltage disconnect to maintain and protect your batterybackup. In addition Dual Schottky Diodes provide protective isolationand seamless transfer to battery when AC power is lost. When AC poweris restored your batteries will be recharged. This unit also comeswith four layers of protection short circuit, overload, over voltage,and over temperature. All RLP series power supplies are wired in afloating ground configuration.

The RLP-4012BBSCLVD-MUis a 2RU rack mount Heavy Duty DC power SupplyWith Battery Backup, Smart Charging, Low Voltage Battery Disconnectand with Remote Monitering and Control. This unit features a frontpanel mounted analog meter for display of voltage and currentamperage and a manual Battery disconnect switch for simple batterymaintenance while still powering your load. Other features include aintegrated 120W smart charger and a Low voltage disconnect tomaintain and protect your battery backup. In addition Dual SchottkyDiodes provide protective isolation and seamless transfer to batterywhen AC power is lost. When AC power is restored your batteries willbe recharged. This unit also comes with four layers of protectionshort circuit, overload, over voltage, and over temperature. RemoteMonitering and Control is provide via Ethernet TCP/IP and SNMP. MUInput/Output features includes 1 internal temperature Sensor,Monitors AC line Voltage, Monitors current (Amps), Monitors VDCoutput, Remote on & off.

The RLP-8012 is a 2RU rack mount Heavy Duty DC power Supply. Thisunit comes with four layers of protection short circuit, overload,over voltage, and over temperature. This unit features a front panelmounted analog meter for display of voltage and current amperage. AllRLP series power supplies are wired in a floating groundconfiguration.

The DP-10-LED-12 is a is a 2RU rack mount 10 position fused powerdistribution panel designed to use standard ATC/ATO fuses. TheDP-10-LED-12 provides front panel LED's to provide a visualindication of a fuse open condition. This power distribution panel is built for up to 20 Amps maximum per fuse for a maximum current of 75Amps per panel.

The RLP-8012BBSCLVD is a 2RU rack mount Heavy Duty DC power SupplyWith battery backup, Smart Charging and Low Voltage BatteryDisconnect. This unit features a front panel mounted analog meter fordisplay of voltage and current amperage and a manual Batterydisconnect switch for simple battery maintenance while still poweringyour load. Other features include a integrated 120W smart chargerand a Low voltage disconnect to maintain and protect your batterybackup. In addition Dual Schottky Diodes provide protective isolationand seamless transfer to battery when AC power is lost. When AC poweris restored your batteries will be recharged. This unit also comeswith four layers of protection short circuit, overload, over voltage,and over temperature. All RLP series power supplies are wired in afloating ground configuration.

The LPB Series of power supplies are designed for use with 12VDCelectronics. The LPB Series contains and internal battery for DCpower backup. The internal battery is recharged when AC power isrestored. All of the LPB models come equipped with three layers ofprotection short circuit, over load, and over temperature protection.The LPB series of power supplies are compatible with all LPH radiohoods.

Features:

Universal Input 88~264 VAC

Short circuit / overload / over temperature protections

Built-in EMI Filter

Front Panel DC Output Indicator (LPB-12 & LPB-15)

Front Panel AC Fail Indicator (LPB-12H)

Internal battery automatically recharges when AC power is restored

Compatible with all LPH Hoods for custom mobile radio mounting

2-year Warranty

The RU1-2012 is a 1RU rack mount AC to DC power supply. The RU1series is designed to provided the most power in a small space aspossible. In addition the RU1 series comes with four layers ofprotection short circuit, overload, over voltage, and overtemperature. All RU1 series power supplies are wired in a floatingground configuration.