RF Site Monitoring

Telewave RF Power Monitors are single or dual-direction devices whichproduce a DC voltage proportional to an RF signal between 30 and 960 MHz, depending on model.

Oz9000, 1 Gps Receiver, Sc/apc Ac Ps, 1x8 Rf Split,antload

Oz9000, 1ch, Gps Rx, Sca, 1x16 48vdc, Rf Split, Ant Load

Oz9000, 2ch, Gps Rx, Sca 1x8, 48vdc, Rf Split, Ant Load

The Telewave PM1C1S is a singlechannel, single antenna automaticalarm panel for low transmit power and high VSWR, featuring "trueVSWR" circuitry and a built-in power monitor. The 2RU panel (3.5" x19") mounts in any standard rack or inside most base station cabinets,and can be powered directly from 120 VAC or 12 VDC.

The Telewave PM5C1S is an automatic alarm panel featuring “true VSWR”circuitry.The PM5C1S panel is not frequency dependent, and powermonitors for multiple bands can be used with a single panel.

The 3128A Wattcher RF Monitor/Alarm; when installed with a dual portThruline Line Section and two elements, is designed for theprotection and monitoring of radio frequency transmission systems.The line section is selected to be compatible with the RF coaxialline used in the transmission system.The elements are selected by the user to cover the desired powerlevels and frequency ranges. Purpose and Function Abnormal loadingconditions cause the transmitter to quickly shutdown, a userselectable audible alarm to sound, and an alarm LED to flash. Remoteaccess is available for resetting audible and visual alarms.Fail-safe or non fail-safe modes are user selectable and thereflected power trip level is adjustable.