Power Dividers

Features:

380 - 2,700 MHz Multi-Band Frequency Range

5 & 10 W Power Rating

Low RF Insertion Loss

20 dB Isolation

RoHS compliant

Low Cost N Design

Microlab Model Dx-85FD series of 2, 3 and 4 way PowerSplitters has been designed to evenly split high power cellularsignals with minimal reflections and loss. Joints are moisturesealed with gaskets to meet IP67. The rugged, lightweight designcan be easily attached to a wall with the supplied bracketand clip.

The wide frequency range allows use with multiband antennasand leaky cable systems. With few solder joints and anair dielectric, the loss is minimized and reliability enhanced.Other connectors are available top order.

Microlab Model Dx-85FD series of 2, 3 and 4 way PowerSplitters has been designed to evenly split high power cellularsignals with minimal reflections and loss. Joints are moisturesealed with gaskets to meet IP67. The rugged, lightweight designcan be easily attached to a wall with the supplied bracketand clip.
The wide frequency range allows use with multiband antennasand leaky cable systems. With few solder joints and anair dielectric, the loss is minimized and reliability enhanced.Other connectors are available top order.

Microlab Model Dx-85FD series of 2, 3 and 4 way PowerSplitters has been designed to evenly split high power cellularsignals with minimal reflections and loss. Joints are moisturesealed with gaskets to meet IP67. The rugged, lightweight designcan be easily attached to a wall with the supplied bracketand clip.
The wide frequency range allows use with multiband antennasand leaky cable systems. With few solder joints and anair dielectric, the loss is minimized and reliability enhanced.Other connectors are available top order.

Microlab Model Dx-85FN series of 2, 3, 4, 5 and 6 way PowerSplitters has been designed to evenly split high power cellularsignals with minimal reflections or loss. All joints are moisture sealed to meet the IP67 rating. The design allows simple attachment to wall using the supplied bracket and clip.
The wide frequency range allows use with multiband antennasand leaky cable systems. With few solder joints and an airdielectric, the loss has been minimized and reliability enhanced. Units also available with 7-16 mm DIN connectors.

Telewave Receiver Power Splitters provide 2 to 8 matched 50 ohmreceiver outputs from one input. The antenna port is tuned with amatching network to insure a balanced input.These rugged, compactsplitters are commonly used in RX multicouplers, and are not intendedto be used with transmitters. Telewave makes a full line oftransmitter power dividers with 500 watt power capability for thispurpose.

Telewave Receiver Power Splitters provide 2 to 8 balanced 50 ohmreceiver outputs from one input. The antenna port is tuned with amatching network to insure a balanced input.These rugged, compactsplitters are commonly used in R X multicouplers, and are not intendedto be used with transmitters. Telewave makes a full line oftransmitter power dividers with 500 watt power capability for thispurpose.

Westell's Power Splitters feature wideband operation coveringall public safety and private mobile frequency bands. With theirlow insertion loss, rugged construction and water resistancethey are ideal for a wide range of applications.

Product Highlights

Covers all Public Safety and Private Mobile Bands

UHF/VHF/700/800/900Mhz

Low Insertion Loss

Low VSWR

High Port Isolation

Product Finish: Red for easy identification

Westell's Power Splitters feature wideband operation coveringall public safety and private mobile frequency bands. With theirlow insertion loss, rugged construction and water resistancethey are ideal for a wide range of applications.

Product Highlights

Covers all Public Safety and Private Mobile Bands

UHF/VHF/700/800/900Mhz

Low Insertion Loss

Low VSWR

High Port Isolation

Product Finish: Red for easy identification

Microlab Dx-83FE 2/3/4 way reactive Power Splitters have beendesigned to evenly split high power cellular signals with minimalreflections or loss. All joints are moisture sealed with o-rings tomeet IP67 rating. The mechanical shape allows ease of mounting to thewall using the supplied brackets. The ultra-wide frequency rangeallows use in 5G NR deployments with multiband antennas and leakycable systems. With few solder joints and an air dielectric, the losshas been minimized and reliability enhanced.

380-2700 MHz 2-Way Reactive Power Divider, 4.3 Female

Microlab Model Dx-08 series of 2, 3 and 4 way Power Splittershas been designed to evenly split high power cellular and WiMAXsignals with minimal reflections or loss. All joints are moisturesealed with o-rings to meet IP67. The mechanical shape allows easyattachment to wall using the supplied clips.

The wide frequency range allows use with multiband antennas and leaky cable systems. With few solder joints and an air dielectric,the loss has been minimized and reliability enhanced. Units areavailable with either N or 7-16 mm connectors.