Power Monitoring

Din mount dual ATC-ATO fused distribution panel. The DIN-10-75 hasten positions at 20 Amps maximum per fuse. Has negative and positivebust bar for efficient power distribution for maximum current of 75Amps.

Features:

Access power for 10 outputs

For 12, 24, and 48 volts DC Systems

Up to 20 Amps per fuse / 75 Amps Max

Includes dual (Neg/Pos) input terminals oneach parallel "add-on" capability

Can be installed on DIN RailTS-35/7.5 or 15

Requires ATC/ATO blades fuses (notincluded)

100A Dualfeed 10/10 GMT

15 Amp GMT Fuse

2 Amp GMT Fuse

20 Amp GMT Fuse

200A 12V/24V Battery Guard Waterproof

Design Features

Waterproof

Prevents excessive discharge of batteries

Can be set to connect / disconnect at several different voltages

Prevents damage to connected components

Protects against excessive voltage caused by faulty alternators or chargers

200A 4&5 Term Ringless Horn Bypass, ACE

3 Amp GMT Fuse

5 Amp GMT Fuse

7.5 Amp GMT Fuse

Battery Guard Waterproof 40A

Design Features

Waterproof

Prevents excessive discharge of batteries

Can be set to connect / disconnect at several different voltages with jumpers

Batteries last longer

Prevents damage to connected components

Protects against excessive voltage caused by faulty alternators or chargers

Battery Guard Waterproof 60A

Design Features

Waterproof

Prevents excessive discharge of batteries

Can be set to connect / disconnect at several different voltages with jumpers

Batteries last longer

Prevents damage to connected components

Protects against excessive voltage caused by faulty alternators or chargers

Class RK5 Bussman Fusetron Dual Element

Neutral Dummy Fuse, Brass, 13/32inx1-1/2in, NNB

The DC-RMCU1 DC-Powered Remote Monitoring and Control Unit, providesthe ability to remotely monitor AC Line voltage up to 300 VAC, up to6 DC Voltages and 1 temperature, monitor the status of up to 4external alarms, as well as the ability to remotely control the stateof 4 digital open-drain MOSFET outputs, all via the internet usingany standard web browser. The Channel 1 DC voltage input isconfigured at the factory to measure current using the included 100Amp/50mV shunt. A mobile friendly version of the status page is alsoincluded. Alarms and email notifications can be configured for the 6analog voltage channels (high or low voltage), and emailnotifications can be configured for the Alarm inputs. Ahigh-temperature alarm threshold can be configured to send an emailnotification, as well as control one of the digital outputsinternally. The DC-RMCU1 also sends SNMP Traps for alarm conditions.The DC-RMCU1 can also be set to log measurements to a 2 GB internalmicro SD card, and the measurements are time stamped with a real-timeclock.

Features:

Send email alerts

SNMP traps

On board reset button for "Hard Reset" to restore settings backto factory defaults

Able to control items or monitordevice., login to make changes and/or view log via web page

On board memory storage. Micro SD Memory Card

6 isolatedDC voltmeters (+/- 100 VDC) or Amp meters

1 AC lineVoltmeter

4 input pins. For alarms, external sensors or drycontact closure

4 output pins. Open collector output todrive external relays or logic

The SiteGraph is the next generation of DuraComm's popular SiteCentri remote monitoring and control units. It improves on ouroriginal design providing more inputs and outputs along withmicrovolt resolution and web-based data graphing. The Site Graph addsthe Internet of Things functionality to existing systems andintegrates with alarm and monitoring software through a web page andSNMP. The SiteGraph allows for automated recovery and detailedmonitoring for your equipment.

Features

Graphing ofdata for each input

User customizable line graphs and bargraphs for each input

Remote power cycling (on/off) ofcircuit breakers, repeaters, routers, power supplies,etc.

Flexible mounting: slim 1RU rack (RM-DC-RMCU-8G) or DINmount (standard)

1 included DC current sensor, +100 to -100amps at 2% accuracy with included shunt

1 internaltemperature temperature and humidity senso

1 external 1external temperature probe

10 fully opto-isolated digitalinputs for door alarms, status inputs, and DC-OK signals

Manymore!

The SiteGraph is the next generation of DuraComm's popular SiteCentri remote monitoring and control units. It improves on ouroriginal design providing more inputs and outputs along withmicrovolt resolution and web-based data graphing. The Site Graph addsthe Internet of Things functionality to existing systems andintegrates with alarm and monitoring software through a web page andSNMP. The SiteGraph allows for automated recovery and detailedmonitoring for your equipment.

Features

Graphing ofdata for each input

User customizable line graphs and bargraphs for each input

Remote power cycling (on/off) ofcircuit breakers, repeaters, routers, power supplies,etc.

Flexible mounting: slim 1RU rack (RM-DC-RMCU-8G) or DINmount (standard)

1 included DC current sensor, +100 to -100amps at 2% accuracy with included shunt

1 internaltemperature temperature and humidity senso

1 external 1external temperature probe

10 fully opto-isolated digitalinputs for door alarms, status inputs, and DC-OK signals

Manymore!