Uninsolated

This high efficiency switch-mode step-down DC-DC converterconverts an input voltage of 24 VDC nominal (range 20 VDC to 32 VDC)to a highly regulated output voltage of 12 VDC nominal (13.6 VDC) at12 Amps. The SDC-12 DC-DC converter is non-isolated (no galvanicisolation between input and output) and meant for use in negativeground systems. Features include short-circuit, reverse polarity andover-voltage protection.

This high efficiency switch-mode step-down DC-DC converterconverts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC)to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at5 Amps. The SDC-5 DC-DC converter is non-isolated (no galvanicisolation between input and output) and meant for use in negativeground systems. Features include short-circuit, reverse polarity andover-voltage protection.

This high efficiency switch-mode step-down DC-DC converterconverts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC)to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at12 Amps. The SDC-15 DC-DC converter is non-isolated (no galvanicisolation between input and output) and meant for use in negativeground systems. Features include overvoltage/short-circuitprotection, temperature compensated current limit, output-sideovervoltage protection, input-side overvoltage/ transient protectionand input-side reverse polarity protection. The SDC-15 DC-DCconverter is designed for heavy duty applications.

This high efficiency switch-mode step-down DC-DC converterconverts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC)to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at20 Amps. The SDC-23 DC-DC converter is non-isolated (no galvanicisolation between input and output) and meant for use in negativeground systems. Features include overvoltage/short-circuitprotection, temperature compensated current limit, output-sideovervoltage protection, input-side overvoltage/ transient protectionand input-side reverse polarity protection. The SDC-23 DC-DCconverter is designed for heavy duty applications.

2 Year Limited Warranty

Non-isolated, switch mode design. Step up from 12VDC to 24VDC at 7Amps DC with very low energy consumption. Small size and lightweight. Protected against overload, short circuit, reverse polarityand high voltage and transient suppression on input side.

• Step up from 12VDC to 24VDC at 7 Amps DC
• Switch Mode design
• CE approved
• High Efficiency
• Over-current protection
• Over-voltage, Reverse Polarity protection
• 6.3 mm push-on flat pin connectors