Co-location Dual Pipe Base Kit

Product Includes:

Dual pipe frames

Pipe mounts

Ring mount

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment iseasily accomplished by pivoting complete frame over saddle mount andhalf-moon slot on mount.

The G2 Sector Frame incorporates achemically etched-alloy tag including manufacturing information (e.g.date, material lot, as well as engineering specifications andtraceability)

Includes
Pipe mount

Plain end pipes (9)

Ring mounts(2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment iseasily accomplished by pivoting complete frame over saddle mount andhalf-moon slot on mount.

The G2 Sector Frame incorporates achemically etched-alloy tag including manufacturing information (e.g.date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames(3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment iseasily accomplished by pivoting complete frame over saddle mount andhalf-moon slot on mount.

The G2 Sector Frame incorporates achemically etched-alloy tag including manufacturing information (e.g.date, material lot, as well as engineering specifications andtraceability)

Includes

Pipe mount

Plain end pipes (12)

Ringmounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment iseasily accomplished by pivoting complete frame over saddle mount andhalf-moon slot on mount.

The G2 Sector Frame incorporates achemically etched-alloy tag including manufacturing information (e.g.date, material lot, as well as engineering specifications andtraceability)

Includes

Pipe mount

Plain end pipes (12)

Ringmounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (9)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (9)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment is easily accomplished by pivoting complete frame over saddle mount and half-moon slot on mount.

The G2 Sector Frame incorporates a chemically etched-alloy tag including manufacturing information (e.g. date, material lot, as well as engineering specifications andtraceability)

Includes:

Pipe mount

Plain end pipes (9)

Ring mounts (2)

Sector frames (3)

Stiff arm

CommScope's new G2™ Series Mount design addresses the problems withcurrent and future EPA, Loading, Assembly-Time and Dead-Weight. G2Series Mount designs are engineered from the ground up with aninnovative vision that started with a blank slate and ended with asolution that focused on each bend, weld, support and the alloycomposition of the material. The G2 Sector Frame consists of atubular V Stand-off design that lowers the mount's EPA to only 11.2sq ft and increases its load bearing capabilities. It is engineeredfor use up to 400ft AGL and able to withstand gusts up to 180mph withequipment weighing as much as 1,500 pounds per sector. It exceedslive load single person requirements by supporting maintenance loadsup to 500 lbs. The saddle mount design features up to 7 taperpositions - from 0° up to 7° taper and azimuth adjustment iseasily accomplished by pivoting complete frame over saddle mount andhalf-moon slot on mount.

The G2 Sector Frame incorporates achemically etched-alloy tag including manufacturing information (e.g.date, material lot, as well as engineering specifications andtraceability)

Include:

Pipe mount

Plain end pipes (12)

Ring mounts (2)

Sector frames (3)

Stiff arm

M'pole 3-sect Frame Kit 12' Long Spine 12x 2-7/8x120 Ap