10.7-11.7 GHz

0.6m | 2ft ValuLine High Performance Antenna, dual polarized, 10.000- 11.700 GHz, CPR90G Flange, White Antenna, Grey Radome

Radio Waves designs and manufactures Standard Performance (SP), HighPerformance (HP) and Super High Performance (SHP) series forterrestrial microwave point-to-point applications. These antennassupport Telecoms, Enterprise and Industrial applications. They areavailable as single or dual polarized antennas and support standardfrequency bands from 1.3 to 86 GHz. The products include 1 ft. (30cm), 1.5 ft. (45 cm), 2 ft. (60 cm), 3 ft (90 cm), 4 ft. (120 cm), 6ft. (180 cm) and 8ft (240 cm) diameter antennas.

Radio Waves designs and manufactures Standard Performance (SP), HighPerformance (HP) and Super High Performance (SHP) series forterrestrial microwave point-to-point applications. These antennassupport Telecoms, Enterprise and Industrial applications. They areavailable as single or dual polarized antennas and support standardfrequency bands from 1.3 to 86 GHz. The products include 1 ft. (30cm), 1.5 ft. (45 cm), 2 ft. (60 cm), 3 ft (90 cm), 4 ft. (120 cm), 6ft. (180 cm) and 8ft (240 cm) diameter antennas.

The HP High Performance Series by RadioWaves offers a full line of high performance parabolic antennas engineered to provide ETSI class 2/3 radiation pattern performance as well as excellent gain. RadioWaves field-proven pre-assembled antennas and robust polemounts ensure "set and forget" installation with minimal post-installation maintenance. The included radome ensures robust and reliable performance under the most challenging conditions. If it's rugged, it must be RadioWaves!

FEATURES AND BENEFITS

High Performance ETSI Class 2/3* Parabolic Antennas - Excellent performance for a wide range of applications

Fully Preassembled at the Factory - Simplifies installation on site and guarantees "factory-tested" quality

*ETSI Class depends on frequency band

The HP High Performance Series by RadioWaves offers a full line of high performance parabolic antennas engineered to provide ETSI class 2/3 radiation pattern performance as well as excellent gain. RadioWaves field-proven pre-assembled antennas and robust polemounts ensure "set and forget" installation with minimal post-installation maintenance. The included radome ensures robust and reliable performance under the most challenging conditions. If it's rugged, it must be RadioWaves!

FEATURES AND BENEFITS

High Performance ETSI Class 2/3* Parabolic Antennas - Excellent performance for a wide range of applications

Fully Preassembled at the Factory - Simplifies installation on site and guarantees "factory-tested" quality

*ETSI Class depends on frequency band

Features:

1.2 m | 4 ft

High Performance Parabolic Reflector Antenna

Single-polarized

10.7-11.7GHz

Radio Waves designs and manufactures Standard Performance (SP), HighPerformance (HP) and Super High Performance (SHP) series forterrestrial microwave point-to-point applications. These antennassupport Telecoms, Enterprise and Industrial applications. They areavailable as single or dual polarized antennas and support standardfrequency bands from 1.3 to 86 GHz. The products include 1 ft. (30cm), 1.5 ft. (45 cm), 2 ft. (60 cm), 3 ft (90 cm), 4 ft. (120 cm), 6ft. (180 cm) and 8ft (240 cm) diameter antennas.

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-WTMR-6-11 will allow you to directly interface an existing direct mount HP6 parabolic antenna to an Aviat WTM4100 series radio. This kit is designed for 6 ft | 1.8 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Rectanglular waveguide interface. If it's rugged, it must be RadioWaves!

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-WTMR-3-11 will allow you to directly interface an existing direct mount HP3 parabolic antenna to an Aviat WTM4100 series radio. This kit is designed for 3 ft | 0.9 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Rectanglular waveguide interface. If it's rugged, it must be RadioWaves!

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-WTMR-4-11 will allow you to directly interface an existing direct mount HP4 parabolic antenna to an Aviat WTM4100 series radio. This kit is designed for 4 ft | 1.2 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Rectanglular waveguide interface. If it's rugged, it must be RadioWaves!

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-WTMC-2-11 will allow you to directly interface an existing direct mount HP2 parabolic antenna to an Aviat WTM4200 series radio. This kit is designed for 2 ft | 0.6 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Circular waveguide interface. If it's rugged, it must be RadioWaves!

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-WTMC-3-11 will allow you to directly interface an existing direct mount HP3 parabolic antenna to an Aviat WTM4200 series radio. This kit is designed for 3 ft | 0.9 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Circular waveguide interface. If it's rugged, it must be RadioWaves!

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-WTMC-4-11 will allow you to directly interface an existing direct mount HP4 parabolic antenna to an Aviat WTM4200 series radio. This kit is designed for 4 ft | 1.2 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Circular waveguide interface. If it's rugged, it must be RadioWaves!

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-WTMC-6-11 will allow you to directly interface an existing direct mount HP6 parabolic antenna to an Aviat WTM4200 series radio. This kit is designed for 6 ft | 1.8 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Circular waveguide interface. If it's rugged, it must be RadioWaves!

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-G2-4-11 will allow you to directly interface an existing direct mount HP4 parabolic antenna to a Ceragon or Cambium series radio. This kit is designed for 4 ft | 1.2 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Rectangular waveguide interface. If it's rugged, it must be RadioWaves!

The Parabolic Reflector Retrofit Kits by RadioWaves allow previously deployed Antennas to be upgraded to the latest radios on the market. These kits come with new feed horns, interface, and mounting hardware needed for rapid installation, under budget!

The RFK-OEM-G2-6-11 will allow you to directly interface an existing direct mount HP6 parabolic antenna to a Ceragon or Cambium series radio. This kit is designed for 6 ft | 1.8 m reflectors to be coupled with radios operating from 10.7 GHz to 11.7 GHz Frequency range with Single Polarization Rectangular waveguide interface. If it's rugged, it must be RadioWaves!