3/4" Permanent Hole Mount

Larsen is proud to present the HyPer Connect™ System . . . abreakthrough in radio connectors. HyPer Connect™ is a universalmaster connector system for all major radio brands.

Features:

Factory pre-installed for greater reliability

Wide variety of HyPer Connect™ adaptors

Small body for easy cable runs

Matching connectors thread on in seconds

Minimal loss, just 0.1 dB

Reduce cable kit and connector inventory

Frees valuable technician time

The Laird MB8UFMEFI vehicle roof mount antenna installation hardwarekit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mountis an all brass permanent mount for a 3/4 inch hole. The LairdTechnologies mobile antenna mount includes 17 feet RG-58/U cable withan installed FME Female connector. Thread size is 1-1/8 inch - 18.

Features:

All brass construction and gold plated contact design ensure themost corrosion resistance and best power transfer available

78 Rockwell Hardness brass material resists corrosion

Silver soldered ground lug and contact virtually eliminates RFnoise or static

Multiple cable options are available

All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert fromlow frequency applications to high frequency applications and back bypulling or replacing the center pin and insulator.

All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert fromlow frequency applications to high frequency applications and back bypulling or replacing the center pin and insulator.

All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert fromlow frequency applications to high frequency applications and back bypulling or replacing the center pin and insulator.

NMOHF mounts require a 3/4” hole for mounting and include 17’ ofcoax.

NMOHF mounts accommodate roof surfaces from 0.1” to .03”. NMOHFTHK(thick) mounts accommodates roof surfaces up to 1/2” thick.

All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert fromlow frequency applications to high frequency applications and back bypulling or replacing the center pin and insulator.

NMOHF mounts require a 3/4” hole for mounting and include 17’ ofcoax.

NMOHF mounts accommodate roof surfaces from 0.1” to .03”. NMOHFTHK(thick) mounts accommodates roof surfaces up to 1/2” thick.

After inventing the original NMO mount in the early 1970’s, Larsenhas continued to set the standard for MO antenna products. Antennasoperating above 1,700 MHz require a better match than the traditionalNMO mount can provide. To meet this requirement, we have redesignedour NMO mount to include a variety of innovative features.

Convert from low to high frequency applications and back simplyby pulling or replacing the center pin and insulator. The largercenter contact pin provides for additional strength against downwardcompression during low frequency installations, resulting in better low frequency VSWR.

High quality components: gold plated contact pin and conductors, zinc alloy body plated with copper and nickel, nickel plated brass ring and precision tooled body parts.

Fully sealed solder connections.

All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert fromlow frequency applications to high frequency applications and back bypulling or replacing the center pin and insulator.

NMOHF mounts require a 3/4” hole for mounting and include 17’ ofcoax.

NMOHF mounts accommodate roof surfaces from 0.1” to .03”. NMOHFTHK(thick) mounts accommodates roof surfaces up to 1/2” thick.