Intelligent 2U Power System with Dual-Breaker Battery Management Module, 12VDC 700W DC Converter Module and two Load Distribution Modules (-48V)

Intelligent 2U Power System with Dual-Breaker Battery Management Module, 24VDC 700W DC Converter Module and two Load Distribution Modules (-48V)

Intelligent 2U Power System with Dual-Breaker Battery Management Module, 12VDC 700W DC Converter Module and two Load Distribution Modules (+48/24V)

Intelligent 1U Power Shelf with Dual-Breaker Battery Management Module and 12VDC 700W DC Converter Module (+48/24V)

Intelligent 1U Power Shelf with Single-Breaker Battery Management Module and 24VDC 700W DC Converter Module (+48/24V)

Features:

1 RU 240 Amp dual bus

front access DC distribution panel for 12/24/48 VDC installations

8 positions rated at 25A continuous output

TCP/IP for remote monitoring and power control of individual outputs

HTML, SNTP v1/v2 and email alarms supported

Input contacts for site monitoring and temperature sensors

Distribution Series 3 - 1RU, 200-amp dual-bus, GMT-fuse DC distribution panel for 24/48 VDC installations. Each bus supports 100 amps peak current and supports 10 GMT fuse-protected outputs, each rated up to 20 amps. Independent Form C alarm contacts for each bus. Includes TCP/IP for remote monitoring and power control of individual outputs. HTML, SNMP v1/v2c/v3 and email alarms supported. Five digital input contacts for site monitoring sensors.

The ICT DISTRIBUTION SERIES 3 provides independent dual bus capability for redundant systems or mixed-voltage sites. Each bus is rated at 100A peak and provides six fuse or breaker protected outputs. Standard models are available for unmanaged applications, while Intelligent models include ICT’s industry leading TCP/IP remote management and power control features.

Features:

200A peak system current rating / 100A per bus

Six outputs per bus

Independent Form C alarm contacts for each bus

Choice of fuse or breaker protected models

80 volt rated FKS ATO style fuses or high-quality, reliable hydraulic/magnetic breakers support 12, 24 and 48VDC

Mixed voltages and polarities can be supported in one panel (provided grounds are common)

-30°C to +60°C operating temperature range

Front panel LED indicators for fuse status (fuse models)

3 year warranty

The ICT Sine Wave Series features 93% peak efficiency, ultra-low noise, and low idle current draw to preserve battery life. The robust design will operate at 3000 watts of output for 2 seconds in order to start demanding loads. With two AC outlets on the front as well as AC hardwire points on the back, the Sine Wave Series is adaptable to various types of installation requirements, whether standalone or rack mounted. Both the standard Form C alarm contacts and optional TCP/IP Ethernet connection can be used to send a remote alarm signal for any type of fault, ideal for remote installations where the site is not easily accessible. The Ethernet option allows remote power-cycling of connected loads, possibly saving a call-out to the site.

Protection Features:

Automatic Overload Protection

Resettable 15A Circuit Breaker

Over Temperature Shutdown

Remote Alarm Form C Contacts

The ICT Sine Wave Series features 93% peak efficiency, ultra-low noise, and low idle current draw to preserve battery life. The robust design will operate at 3000 watts of output for 2 seconds in order to start demanding loads. With two AC outlets on the front as well as AC hardwire points on the back, the Sine Wave Series is adaptable to various types of installation requirements, whether standalone or rack mounted. Both the standard Form C alarm contacts and optional TCP/IP Ethernet connection can be used to send a remote alarm signal for any type of fault, ideal for remote installations where the site is not easily accessible. The Ethernet option allows remote power-cycling of connected loads, possibly saving a call-out to the site.

Protection Features:

Automatic Overload Protection

Resettable 15A Circuit Breaker

Over Temperature Shutdown

Remote Alarm Form C Contacts

The ICT Sine Wave Series features 93% peak efficiency, ultra-low noise, and low idle current draw to preserve battery life. The robust design will operate at 3000 watts of output for 2 seconds in order to start demanding loads. With two AC outlets on the front as well as AC hardwire points on the back, the Sine Wave Series is adaptable to various types of installation requirements, whether standalone or rack mounted. Both the standard Form C alarm contacts and optional TCP/IP Ethernet connection can be used to send a remote alarm signal for any type of fault, ideal for remote installations where the site is not easily accessible. The Ethernet option allows remote power-cycling of connected loads, possibly saving a call-out to the site.

Protection Features:

Automatic Overload Protection

Resettable 15A Circuit Breaker

Over Temperature Shutdown

Remote Alarm Form C Contacts

The redesigned ICT180SE-12IRC load distribution panel allows DC power to be distributed to nine ATO fuse-protected output channels and three J-Case high current outputs. An operating voltage range of 10 to 30 volts DC makes this panel ideal for 12 and 24 volt DC applications. ICT’s industry-leading TCP/IP Ethernet management software and easy to use graphical user interface are included. Remote power control of individual outputs allows for manual or automatic load shutdown, load shedding, or power cycling over Ethernet.

The Pro Series line of DC power supplies is a high performance, cost effective, high efficiency 1RU DC power supply designed for a variety of mission-critical applications. The core of the Pro Series is derived from the state-of-the-art ICT Digital Series power supply design that delivers high efficiency, power factor corrected AC input, space-saving 1RU chassis, FCC Class B low noise rating, and an optional battery backup terminal with integrated low voltage disconnect.

The Pro Series line of DC power supplies is a high performance, cost effective, high efficiency 1RU DC power supply designed for a variety of mission-critical applications. The core of the Pro Series is derived from the state-of-the-art ICT Digital Series power supply design that delivers high efficiency, power factor corrected AC input, space-saving 1RU chassis, FCC Class B low noise rating, and an optional battery backup terminal with integrated low voltage disconnect.

The Pro Series line of DC power supplies is a high performance, cost effective, high efficiency 1RU DC power supply designed for a variety of mission-critical applications. The core of the Pro Series is derived from the state-of-the-art ICT Digital Series power supply design that delivers high efficiency, power factor corrected AC input, space-saving 1RU chassis, FCC Class B low noise rating, and an optional battery backup terminal with integrated low voltage disconnect.

6 Port DIN Rail Mount DC Distribution 12 Amps Per Port

The Pro Series line of DC power supplies is a high performance, high efficiency 1RU DC power supply with no compromises. The core of the Pro Series is derived from the state-of-the-art ICT Digital Series power supply design that delivers high efficiency, power factor corrected AC input, space-saving 1RU chassis, FCC Class B low noise rating, and an optional battery backup terminal with integrated low voltage disconnect.

ICT Pro Series DC power supplies provide 690 watts of power with 12, 24 or 48VDC output. They provide an ideal DC power solution for wireless communications professionals who demand cost effective, high efficiency space-saving DC power systems for LMR, broadband, and network communications equipment including radios, repeaters, trunking systems, paging systems, RF amplifiers, microwave, WiMax, routers, bridges, multiplexers, and VOIP. The Pro Series is also ideal for industrial power applications such as security systems, transportation, process control, and DC in-building power.

690 watts of output power in a 1RU rack mount chassis.

90 to 93% efficiency over a broad power range (230VAC input).

Wide-ranging power factor corrected AC input saves energy.

Form C alarm and remote shutdown contacts.

Optional battery backup with integrated low voltage disconnect for charging and protecting batteries.

The Pro Series line of DC power supplies is a high performance, high efficiency 1RU DC power supply with no compromises. The core of the Pro Series is derived from the state-of-the-art ICT Digital Series power supply design that delivers high efficiency, power factor corrected AC input, space-saving 1RU chassis, FCC Class B low noise rating, and an optional battery backup terminal with integrated low voltage disconnect.

ICT Pro Series DC power supplies provide 690 watts of power with 12, 24 or 48VDC output. They provide an ideal DC power solution for wireless communications professionals who demand cost effective, high efficiency space-saving DC power systems for LMR, broadband, and network communications equipment including radios, repeaters, trunking systems, paging systems, RF amplifiers, microwave, WiMax, routers, bridges, multiplexers, and VOIP. The Pro Series is also ideal for industrial power applications such as security systems, transportation, process control, and DC in-building power.

690 watts of output power in a 1RU rack mount chassis.

90 to 93% efficiency over a broad power range (230VAC input).

Wide-ranging power factor corrected AC input saves energy.

Form C alarm and remote shutdown contacts.

Optional battery backup with integrated low voltage disconnect for charging and protecting batteries.

The Pro Series line of DC power supplies is a high performance, high efficiency 1RU DC power supply with no compromises. The core of the Pro Series is derived from the state-of-the-art ICT Digital Series power supply design that delivers high efficiency, power factor corrected AC input, space-saving 1RU chassis, FCC Class B low noise rating, and an optional battery backup terminal with integrated low voltage disconnect.

ICT Pro Series DC power supplies provide 690 watts of power with 12, 24 or 48VDC output. They provide an ideal DC power solution for wireless communications professionals who demand cost effective, high efficiency space-saving DC power systems for LMR, broadband, and network communications equipment including radios, repeaters, trunking systems, paging systems, RF amplifiers, microwave, WiMax, routers, bridges, multiplexers, and VOIP. The Pro Series is also ideal for industrial power applications such as security systems, transportation, process control, and DC in-building power.

690 watts of output power in a 1RU rack mount chassis.

90 to 93% efficiency over a broad power range (230VAC input).

Wide-ranging power factor corrected AC input saves energy.

Form C alarm and remote shutdown contacts.

Optional battery backup with integrated low voltage disconnect for charging and protecting batteries.

The ICT Modular Power Series provides N+1 redundancy with 700 watt hot swappable 12 volt power module. The power shelf can accomodate one to four power modules and one or two accessory modules. A dedicated slot holds the optional Intelligent Control Module for full TCP/IP remote monitoring and control. When combined with the optional Battery Management Module, the Intelligent Control Module also provides advanced battery functions including battery state of charge, estimated run time remaining, and battery discharge testing.

The ICT Modular Power Series provides N+1 redundancy with 700 watt hot swappable 24 volt power module. The power shelf can accomodate one to four power modules and one or two accessory modules. A dedicated slot holds the optional Intelligent Control Module for full TCP/IP remote monitoring and control. When combined with the optional Battery Management Module, the Intelligent Control Module also provides advanced battery functions including battery state of charge, estimated run time remaining, and battery discharge testing.

Comes with blanking plates installed. Hydraulic/Magnetic Breakers Sold Separately.

The ICT180S-12 DISTRIBUTION SERIES fuse-protected DC load distribution panel allows you to connect up to twelve DC loads to a single power source, thereby providing a flexible, cost effective approach to site DC power design. The 1RU 19-inch rackmount design saves valuable space, and the fuses are mounted on the front for easy replacement. Twelve output circuits allow you to expand your system as your needs grow, without giving up more valuable rack space.

48Vdc DIN Rail Mount Pwr Sup & Batt Charger 360W

The ICT300-12SNV inverter is designed specifically for communications site applications. Whether your communications site is off the grid, or designed to operate from DC power for uninterrupted quality of service, certain components still require high quality, reliable AC sine wave power to operate.

ICT Site Inverters are low profile, high performance sine-wave inverter that converts DC energy from your battery source into 300 watts of utility grade power for site equipment that requires AC electricity, such as radio links, multiplexers, routers, or digital video recorders. ICT inverters provide extremely low harmonic distortion and high efficiency, meaning that your equipment receives extremely quiet, high quality power.

Up to three ICT Site Inverters can be mounted in a single 1RU 19 inch rack shelf, to provide almost 1kW of power and six AC outlets in an ultra-compact, space saving design.

The ICT300-48SNV inverter is designed specifically for communications site applications. Whether your communications site is off the grid, or designed to operate from DC power for uninterrupted quality of service, certain components still require high quality, reliable AC sine wave power to operate.

ICT Site Inverters are low profile, high performance sine-wave inverter that converts DC energy from your battery source into 300 watts of utility grade power for site equipment that requires AC electricity, such as radio links, multiplexers, routers, or digital video recorders. ICT inverters provide extremely low harmonic distortion and high efficiency, meaning that your equipment receives extremely quiet, high quality power.

Up to three ICT Site Inverters can be mounted in a single 1RU 19 inch rack shelf, to provide almost 1kW of power and six AC outlets in an ultra-compact, space saving design.

The ICT206012-35AI2 converter is designed to operate from a negative or positive ground electrical system, providing complete isolation between primary and secondary circuits, as well as from the chassis. The high efficiency design saves energy, incorporates extra input filtering and spike protection, and is vibration and moisture resistant. Flange mounting is standard. An extra contact is provided that allows the converter to be turned on and off by a main or ignition circuit, saving energy and battery life.

ICT Isolated Series 2 DC-DC converters provide additional features not normally found on compact converters. This line delivers higher efficiency, an on/off control contact to help save energy and battery life, three high power models, and a 3-year warranty. The Isolated Series 2 provides the benefits of full isolation at non-isolated converter price levels.

Isolated Series 2 converters can operate from a negative or positive ground electrical system, and are ideal for applications where complete isolation is necessary between primary and secondary circuits, as well as from the chassis.

Whether for a vehicle, off-grid power system, or utility substation, Isolated Series 2 converters come with the added assurance of years of proven ICT reliability and performance.

The ICT1212-35AI2 converter is designed to operate from a negative or positive ground electrical system, providing complete isolation between primary and secondary circuits, as well as from the chassis. The high efficiency design saves energy, incorporates extra input filtering and spike protection, and is vibration and moisture resistant. Flange mounting is standard. An extra contact is provided that allows the converter to be turned on and off by a main or ignition circuit, saving energy and battery life.

The ICT24012-30BC2 is a high efficiency, power factor corrected universal AC input DC power supply and three stage battery charger that operates as a DC UPS, providing uninterrupted DC power to critical loads, even when AC mains fail. The ICT IntelliCharge Series design allows the battery charge to be regulated independently from the DC outputs, meaning that the battery will always receive the optimal charging current without the load being affected. Intelligent 3-stage charging will bring a battery back to a full state of charge much faster than trickle or float charging. The IntelliCharge Series supports temperature compensated charging and adjustable battery chemistry types, and remote alarms.

PFC 100-265 VAC Input Voltage

-30°C to 60°C Operating Temperature

Intelligent 3-Stage battery charging

Integrated LVD

Temperature Compensated Charging

Form C Alarm Contacts

Optional 1RU Rack Mount Kit

Replacement for 22012-30BC

The ICT24024-15BC2 is a high efficiency, power factor corrected universal AC input DC power supply and three stage battery charger that operates as a DC UPS, providing uninterrupted DC power to critical loads, even when AC mains fail. The ICT IntelliCharge Series design allows the battery charge to be regulated independently from the DC outputs, meaning that the battery will always receive the optimal charging current without the load being affected. Intelligent 3-stage charging will bring a battery back to a full state of charge much faster than trickle or float charging. The IntelliCharge Series supports temperature compensated charging and adjustable battery chemistry types, and remote alarms.

PFC 100-265 VAC Input Voltage

-30°C to 60°C Operating Temperature

Intelligent 30Stage Battery Charging

Temperature Compensated Charging

Form C Alarm Contacts

Optional 1RU Rack Mount Kit

The ICT24048-7BC2 is a high efficiency, power factor corrected universal AC input DC power supply and three stage battery charger that operates as a DC UPS, providing uninterrupted DC power to critical loads, even when AC mains fail. The ICT IntelliCharge Series design allows the battery charge to be regulated independently from the DC outputs, meaning that the battery will always receive the optimal charging current without the load being affected. Intelligent 3-stage charging will bring a battery back to a full state of charge much faster than trickle or float charging. The IntelliCharge Series supports temperature compensated charging and adjustable battery chemistry types, and remote alarms.

PFC 100-265VAC Input Voltage

-30°C to 60°C Operating Temperature

Intelligent 3-Stage Battery Charging

Integrated LVD

Temperature Compensated Charging

Form C Alarm Contacts

Optional 1RU Rack Mount Kit

The ICT24012-20CM features universal power factor corrected AC input, 90% efficiency, current-limited battery backup terminals, output voltage adjustable between 12.0 and 15.5 VDC, extended range operating temperature, and threaded mounting positions. Chassis Mount Power Supply - 13.8V / 20A.

The ICT2412-40A converter will provide continuous trouble-free power. It is designed for high efficiency and long service life. The rugged case and modular design have proven durable in harsh environments. Extra silicone is used for vibration and moisture resistance. Standard features include: easy access mounting holes, a terminal block connector, current limiting, overvoltage protection, fuse protection, and a high surge capacity.

The ICT2412-30A converter will provide continuous trouble-free power. It is designed for high efficiency and long service life. The rugged case and modular design have proven durable in harsh environments. Extra silicone is used for vibration and moisture resistance. Standard features include: easy access mounting holes, a terminal block connector, current limiting, overvoltage protection, fuse protection, and a high surge capacity.

1.694-2.4/4x3.5/2x5GHz 10Port 2Deg Fixed EDT 24 NEX10 Ant

The ICT2412-20A converter will provide continuous trouble-free power. It is designed for high efficiency and long service life. The rugged case and modular design have proven durable in harsh environments. Extra silicone is used for vibration and moisture resistance. Standard features include: easy access mounting holes, a terminal block connector, current limiting, overvoltage protection, fuse protection, and a high surge capacity.

The ICT2412-15A converter will provide continuous trouble-free power. It is designed for high efficiency and long service life. The rugged case and modular design have proven durable in harsh environments. Extra silicone is used for vibration and moisture resistance. Standard features include: easy access mounting holes, a terminal block connector, current limiting, overvoltage protection, fuse protection, and a high surge capacity.

ICT Noise Filter

The 12 Amp Power Conditioner is designed to filter out differential and common mode noise which is present in industrial equipment, automobiles and electrical systems. These conditioners filter both positive and negative leads of the electrical system.

FEATURE HIGHLIGHTS:

High Quality

Reliable

Modular Design

Rugged Case

12 Amp Power Conditioner

Cvr Knwd TK7/816/80H, NEXEDGE NX7/800 NX7/820HGK 15/20/30A

ICT-DIN rail adapter kit allow ICT IntelliCharge Series battery chargers and Site Inverter 300 inverters to be mounted on standard DIN rails

All of the ICT Noise Filters are designed to filter out differential and common mode noise which is present in industrial equipment, automobiles and electrical systems. These conditioners filter both positive and negative leads of the electrical system.
FEATURE HIGHLIGHTS:

High Quality

Reliable

Modular Design

Rugged Case