RFS Technologies Waveguides & Accessories

10.0-11.70 FlexWell Elliptical Waveguide Premium/Standard Performance

FLEXWELL® elliptical waveguide is constructed of longitudinallycontinuous seam welded, highly conductive copper tube, corrugated andprecision formed into an elliptical cross section. It is manufacturedin continuous lengths using a special seam welding process developedby the RFS organization.

FLEXWELL® elliptical waveguide is constructed of longitudinallycontinuous seam welded, highly conductive copper tube, corrugated andprecision formed into an elliptical cross section. It is manufacturedin continuous lengths using a special seam welding process developedby the RFS organization.

The Standard Grounding Kit is designed to comply with RoHS (EU 2002/95/EC) and CRoHS (China SJ/T11363-2006) directives and has been verified by independent labs to withstand the damaging effects of lightning current. The pre-formed copper strap and associated hardware facilitates a proper attachment to the elliptical waveguide, insuring that the performance of the elliptical waveguide is not being compromised. The 6-gauge, 7 strand copper wire provides the most practical and effective low-inductance transfer of lightning induced current from your elliptical waveguide to your system ground.

The Standard Grounding Kit is designed to comply with RoHS (EU 2002/95/EC) and CRoHS (China SJ/T11363-2006) directives and has been verified by independent labs to withstand the damaging effects of lightning current. The pre-formed copper strap and associated hardware facilitates a proper attachment to the elliptical waveguide, insuring that the performance of the elliptical waveguide is not being compromised. The 6-gauge, 7 strand copper wire provides the most practical and effective low-inductance transfer of lightning induced current from your elliptical waveguide to your system ground.

The Standard Grounding Kit is designed to comply with RoHS (EU 2002/95/EC) and CRoHS (China SJ/T11363-2006) directives and has been verified by independent labs to withstand the damaging effects of lightning current. The pre-formed copper strap and associated hardware facilitates a proper attachment to the elliptical waveguide, insuring that the performance of the elliptical waveguide is not being compromised. The 6-gauge, 7 strand copper wire provides the most practical and effective low-inductance transfer of lightning induced current from your elliptical waveguide to your system ground.

Non-Tunable Connector for E/EP65 Waveguide CPR137G 5.725-7.125GHz

Non-Tunable Connector for E/EP60 Waveguide CPR137G 5.6-6.425GHz

Standard Hanger Kit for E/EP60, Stainless Steel Non-insulated, Kit of10