RFS HYBRIFLEX

Features:

Provides a means for terminating HYBRIFLEX tocabinets or junction boxes

Forms a mechanical watertightconnection

Provides ground continuity to HYBRIFLEXarmor

Standard material is aluminum

Available withNPT threads

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process and eliminate the need for and cost of cable grounding.

HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It eliminates the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Single Strand Fiber
• Lightweight solution and compact design → Decreases tower loading
• Robust cabling → Eliminates need for expensive cable trays and ducts
• Optical fiber and power cables housed in single corrugated cable → Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles → Allows both indoor and outdoor applications

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process and eliminate the need for and cost of cable grounding.

HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It eliminates the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Aluminum corrugated armor with outstanding bending characteristics → Minimizes installation time and enables mechanical protection and shielding
• Outer conductor grounding → Eliminates typical grounding requirements and saves on installation costs
• Lightweight solution and compact design → Decreases tower loading
• Robust cabling → Eliminates need for expensive cable trays and ducts
• Installation of tight bundled fiber optic cable pairs directly to the RRH → Reduces CAPEX and wind load by eliminating need for interconnection
• Optical fiber and power cables housed in single corrugated cable → Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles → Allows both indoor and outdoor applications

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process and eliminate the need for and cost of cable grounding.

HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It eliminates the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Single Strand Fiber
• Lightweight solution and compact design → Decreases tower loading
• Robust cabling → Eliminates need for expensive cable trays and ducts
• Optical fiber and power cables housed in single corrugated cable → Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles → Allows both indoor and outdoor applications

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process and eliminate the need for and cost of cable grounding.

HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It eliminates the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Aluminum corrugated armor with outstanding bending characteristics → Minimizes installation time and enables mechanical protection and shielding
• Outer conductor grounding → Eliminates typical grounding requirements and saves on installation costs
• Lightweight solution and compact design → Decreases tower loading
• Robust cabling → Eliminates need for expensive cable trays and ducts
• Installation of tight bundled fiber optic cable pairs directly to the RRH → Reduces CAPEX and wind load by eliminating need for interconnection
• Optical fiber and power cables housed in single corrugated cable → Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles → Allows both indoor and outdoor applications

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process and eliminate the need for and cost of cable grounding.

HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It eliminates the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Single Strand Fiber
• Lightweight solution and compact design → Decreases tower loading
• Robust cabling → Eliminates need for expensive cable trays and ducts
• Optical fiber and power cables housed in single corrugated cable → Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles → Allows both indoor and outdoor applications

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process and eliminate the need for and cost of cable grounding.

HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It eliminates the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Aluminum corrugated armor with outstanding bending characteristics → Minimizes installation time and enables mechanical protection and shielding
• Outer conductor grounding → Eliminates typical grounding requirements and saves on installation costs
• Lightweight solution and compact design → Decreases tower loading
• Robust cabling → Eliminates need for expensive cable trays and ducts
• Installation of tight bundled fiber optic cable pairs directly to the RRH → Reduces CAPEX and wind load by eliminating need for interconnection
• Optical fiber and power cables housed in single corrugated cable → Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles → Allows both indoor and outdoor applications

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process and eliminate the need for and cost of cable grounding.

HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It eliminates the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Single Strand Fiber
• Lightweight solution and compact design → Decreases tower loading
• Robust cabling → Eliminates need for expensive cable trays and ducts
• Optical fiber and power cables housed in single corrugated cable → Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles → Allows both indoor and outdoor applications

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process and eliminate the need for and cost of cable grounding.

HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It eliminates the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Aluminum corrugated armor with outstanding bending characteristics → Minimizes installation time and enables mechanical protection and shielding
• Outer conductor grounding → Eliminates typical grounding requirements and saves on installation costs
• Lightweight solution and compact design → Decreases tower loading
• Robust cabling → Eliminates need for expensive cable trays and ducts
• Installation of tight bundled fiber optic cable pairs directly to the RRH → Reduces CAPEX and wind load by eliminating need for interconnection
• Optical fiber and power cables housed in single corrugated cable → Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles → Allows both indoor and outdoor applications

RFS' HYBRIFLEX^® Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

This low-inductance version of HYBRIFLEX^® allows mobile operators deploying an RRH architecture to deploy >400ft sites without the danger of power-cycling their RRHs due to voltage swings, which could occur in some specific instances. It combines bend-insensitive single-mode fiber (12 pairs of DLC connectors), 6 pairs of low-inductance DC wires and 9 pairs of 18AWG wires used to carry alarm signals. The package also includes a special RFS-designed DC insulating boot, used to properly protect and insulate the DC wires after stripping the jacket, avoiding possible short-circuits while wiring it to the distribution boxes. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX^® cable.

Features

Patented DC Wire Insulator.

Aluminum corrugated armor with outstanding bending characteristics.

Same accessories as 1-1/4" coaxial cable.

Outer conductor grounding.

Lightweight solution and compact design.

Robust cabling.

Optical fiber and power cables housed in single corrugated cable.

Outdoor, flame-retardant jacket.

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

This low-inductance version of HYBRIFLEX allows mobile operators deploying an RRH architecture to deploy >400ft sites without the danger of power-cycling their RRHs due to voltage swings, which could occur in some specific instances. It combines bend-insensitive single-mode fiber (12 pairs of DLC connectors), 6 pairs of low-inductance DC wires and 9 pairs of 18AWG wires used to carry alarm signals. The package also includes a special RFS-designed DC insulating boot, used to properly protect and insulate the DC wires after stripping the jacket, avoiding possible short-circuits while wiring it to the distribution boxes. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features

Patented DC Wire Insulator.

Aluminum corrugated armor with outstanding bending characteristics.

Same accessories as 1-1/4" coaxial cable.

Outer conductor grounding.

Lightweight solution and compact design.

Robust cabling.

Optical fiber and power cables housed in single corrugated cable.

Outdoor, flame-retardant jacket.

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

This low-inductance version of HYBRIFLEX allows mobile operators deploying an RRH architecture to deploy >400ft sites without the danger of power-cycling their RRHs due to voltage swings, which could occur in some specific instances. It combines bend-insensitive single-mode fiber (12 pairs of DLC connectors), 6 pairs of low-inductance DC wires and 9 pairs of 18AWG wires used to carry alarm signals. The package also includes a special RFS-designed DC insulating boot, used to properly protect and insulate the DC wires after stripping the jacket, avoiding possible short-circuits while wiring it to the distribution boxes. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features

Patented DC Wire Insulator.

Aluminum corrugated armor with outstanding bending characteristics.

Same accessories as 1-1/4 coaxial cable.

Outer conductor grounding.

Lightweight solution and compact design.

Robust cabling.

Optical fiber and power cables housed in single corrugated cable.

Outdoor, flame-retardant jacket.

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

This low-inductance version of HYBRIFLEX allows mobile operators deploying an RRH architecture to deploy >400ft sites without the danger of power-cycling their RRHs due to voltage swings, which could occur in some specific instances. It combines bend-insensitive single-mode fiber (12 pairs of DLC connectors), 6 pairs of low-inductance DC wires and 9 pairs of 18AWG wires used to carry alarm signals. The package also includes a special RFS-designed DC insulating boot, used to properly protect and insulate the DC wires after stripping the jacket, avoiding possible short-circuits while wiring it to the distribution boxes. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features

Patented DC Wire Insulator.

Aluminum corrugated armor with outstanding bending characteristics.

Same accessories as 1-1/4" coaxial cable.

Outer conductor grounding.

Lightweight solution and compact design.

Robust cabling.

Optical fiber and power cables housed in single corrugated cable.

Outdoor, flame-retardant jacket.

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments.

This low-inductance version of HYBRIFLEX allows mobile operators deploying an RRH architecture to deploy >400ft sites without the danger of power-cycling their RRHs due to voltage swings, which could occur in some specific instances. It combines bend-insensitive single-mode fiber (12 pairs of DLC connectors), 6 pairs of low-inductance DC wires and 9 pairs of 18AWG wires used to carry alarm signals. The package also includes a special RFS-designed DC insulating boot, used to properly protect and insulate the DC wires after stripping the jacket, avoiding possible short-circuits while wiring it to the distribution boxes. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features

Patented DC Wire Insulator.

Aluminum corrugated armor with outstanding bending characteristics.

Same accessories as 1-1/4" coaxial cable.

Outer conductor grounding.

Lightweight solution and compact design.

Robust cabling.

Optical fiber and power cables housed in single corrugated cable.

Outdoor, flame-retardant jacket.

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments. It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process. HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It may eliminated the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Aluminum corrugated armor with outstanding bending characteristics - Minimizes installation time and enables mechanical protection and shielding
• Outer conductor grounding - Saves on installation costs
• Lightweight solution and compact design - Decreases tower loading
• Robust cabling - Eliminates need for expensive cable trays and ducts
• Installation of tight bundled fiber optic cable pairs directly to the RRH - Reduces CAPEX and wind load by eliminating need for interconnection
• Optical fiber and power cables housed in single corrugated cable - Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles - Allows both indoor and outdoor applications

PRODUCT DESCRIPTION

The HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments. It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process. HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It may eliminate the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX accessories can be used with HYBRIFLEX cable.

FEATURES / BENEFITS

• Aluminum corrugated armor with outstanding bending characteristics - Minimizes installation time and enables mechanical protection and shielding
• Outer conductor grounding - Saves on installation costs
• Lightweight solution and compact design - Decreases tower loading
• Robust cabling - Eliminates need for expensive cable trays and ducts
• Installation of tight bundled fiber optic cable pairs directly to the RRH - Reduces CAPEX and wind load by eliminating need for interconnection
• Optical fiber and power cables housed in single corrugated cable - Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles - Allows both indoor and outdoor applications
• 100% Factory tested - Online test results available

RFS' HYBRIFLEX Remote Radio Head (RRH) hybrid feeder cabling solution combines optical fiber and DC power for RRHs in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRH deployments. It was developed to reduce installation complexity and costs at Cellular sites. HYBRIFLEX allows mobile operators deploying an RRH architecture to standardize the RRH installation process. HYBRIFLEX combines optical fiber (multi-mode or single-mode) and power in a single corrugated cable. It may eliminate the need for junction boxes and can connect multiple RRHs with a single feeder. Standard RFS CELLFLEX® accessories can be used with HYBRIFLEX cable.

Features/Benefits

• Aluminum corrugated armor with outstanding bending characteristics - Minimizes installation time and enables mechanical protection and shielding
• Outer conductor grounding - Saves on installation costs
• Lightweight solution and compact design - Decreases tower loading
• Robust cabling - Eliminates need for expensive cable trays and ducts
• Installation of tight bundled fiber optic cable pairs directly to the RRH - Reduces CAPEX and wind load by eliminating need for interconnection
• Optical fiber and power cables housed in single corrugated cable - Saves CAPEX by standardizing RRH cable installation and reducing installation requirements
• UL-Listed, flame-retardant jacket, UV protected assembles - Allows both indoor and outdoor applications