The ALPU HT GBEPOE Ethernet Surge Protector is designed to provide EMP protection for equipment and facilities per Department of Homeland Security (DHS) and the Alliance for Telecommunications Industry Solutions (ATIS) guidelines, and have been tested for survivability to the peak threat levels of the harsh Early Time (E1) and Intermediate Time (E2) High-Altitude (HEMP) environments as defined in MIL-STD-188-125.

The ALPU HT GBEPOE Ethernet Surge Protector is ideal for protecting high speed 10/1000BT communications networks. The protection circuits utilize silicon avalanche diode technology, and provide full-mode protection for all pins on the shielded RJ-45.

The protection circuit board is housed in an aluminum enclosure. The enclosure is an outdoor qualified NEMA 3R type with versatile mounting flanges. The unit is intended to be wall mounted with an optional bracket available to allow a wide range of pole mount configurations. A dedicated ground point on the housing must be bonded to the nearest grounding system (or Master Ground bar) for proper surge protection functionality.

The system wiring is installed with RJ-45 type connectors that can install directly into the chassis without having to cut or splice or route through awkward strain relief holes. The enclosure includes a built in cable retention feature for improved cable management using screw down clamps

• Tested to MIL-STD-188-125 Early Time (E1) and Intermediate Time (E2) HEMP environments
• Listed to UL 497B
• Future-proofed for evolving Power over Ethernet Technology
• Fast response, non-degrading Silicon Avalanche Suppression Diode surge protection technology
• Continuous protection to downstream equipment
• Outdoor Rated
• Wall or pole mounting