Features:

The FRM mount is a lightweight mount.

It is galvanized for corrosion protection.

The FRM mount is easily shipped via UPS.

LMR®-600 is a flexible, high performance, outdoor rated, 1/2"low-loss 50 Ohm coaxial cable. The use of Times X series connectors,WSB-600 boots and the CST-600 prep tool will insure a quick, rugged,reliable termination every time.

Positive Stop N-Male for 1/2 LDF4, AL4RPV, HL4RPV

1.5-1000 MHz Bulkhead Mount Low Power Coax Protector with N-Female

450-470 MHZ 3-ELEMENT 7.1 DB GOLD ANODIZED YAGI ANTENNA N-FEMALE

The Telewave ANT450Y10-WR is a high performance directional antenna, designed especially for point to point as well as point to multipointapplications. This antenna produces 10 dBd forward gain with anexcellent front-to-back ratio. Solid aluminum elements with 360°welds provide exceptional strength and prevent intermodulation. Eachantenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain andwind blown abrasives such as desert sand. The feed line is protectedwithin the boom, and the radiating element is completely sealedagainst ice and other environmental hazards with a tough, RFtransparent radome. The ANT450Y7-WR includes a welded vertical plateand mast clamp set. A horizontal plate is optional. The clamp setsecures the antenna to a vertical mast or tower support from 1.5" -3.5" O.D. For installations on angled supports, the "U" mountprovides 3 separate planes of rotation to allow almost any requiredorientation of the antenna. The "U" mount attaches to virtually allsupports up to 3.5" in diameter, and can be adapted to flat surfacesand utility poles.

The BMYD450K has been engineered to meet the requirements of a highgain, broadband, premium quality antenna. This antenna provides 10dBd gain and operates in the 450-470 MHz range. The BMYD450K ismanufactured using high strength 6061-T6 aluminum to withstand heavyice, high wind and other harsh conditions. All elements are welded tothe boom and the dipole design has an integral feed line welded tothe boom for extra strength and electrical conductivity. Thiseliminates misalignment or fastener problems. The entire antenna isanodized for appearance and corrosion resistance. A heavy duty clampis supplied which easily permits horizontal or vertical polarization.

450-470 MHZ 3-ELEMENT 7.1 DB SILVER SERIES YAGI ANTENNA N/F

450-470 MHZ, 300 WATT, 10 DBD 7-ELEMENT HD YAGI, DIRECT-N

450-470 MHZ, 300 WATT, 6 DBD, 3 ELEMENT HD YAGI, DIRECT N

Features:

Highly directional coverage and good front­to­back ratio

Rugged, reliable design

Stacked arrays

The Telewave ANT450Y7-WR is a high performance directional antenna,designed especially for point to point as well as point to multipointapplications. This antenna produces 7 dBd forward gain with anexcellent front-to-back ratio.
Solid aluminum elements with 360° welds provide exceptional strength and prevent intermodulation. Each antenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and wind blown abrasives such as desert sand. The feed line is protected within the boom, and the radiating element is completely sealed against ice and other environmental hazards with a tough, RF-transparent radome.
The ANT450Y7-WR includes a welded vertical plate and mast clamp set. A horizontal plate is optional. The clamp set secures the antenna to a vertical mast or tower support from 1.5" - 3.5" O.D. For installations on angled supports, the "U" mount provides 3 separate planes of rotation to allow almost any required orientation of the antenna. The "U" mount attaches to virtually all supports up to 3.5" in diameter, and can be adapted to flat surfaces and utility poles.

The Telewave ANT450Y7-WR is a high performance directional antenna,designed especially for point to point as well as point to multipointapplications. This antenna produces 7 dBd forward gain with anexcellent front-to-back ratio.
Solid aluminum elements with 360° welds provide exceptional strength and prevent intermodulation. Each antenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and wind blown abrasives such as desert sand. The feed line is protected within the boom, and the radiating element is completely sealed against ice and other environmental hazards with a tough, RF-transparent radome.
The ANT450Y7-WR includes a welded vertical plate and mast clamp set. A horizontal plate is optional. The clamp set secures the antenna to a vertical mast or tower support from 1.5" - 3.5" O.D. For installations on angled supports, the "U" mount provides 3 separate planes of rotation to allow almost any required orientation of the antenna. The "U" mount attaches to virtually all supports up to 3.5" in diameter, and can be adapted to flat surfaces and utility poles.

Features:

Highly directional coverage and good front­to­back ratio

Rugged, reliable design

Stacked arrays

450-470 MHZ 3-ELEMENT 7.1 DB GOLD ANODIZED YAGI ANTENNA N-FEMALE

450-470 MHZ, 300 WATT, 6 DBD, 3 ELEMENT HD YAGI, DIRECT N