LMR® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables

The Times Protect™ LP-BTR high performance surge arrestor series addresses applications in the 20MHz-1000MHz spectrum. Our unique DC blocking technology employed in this design provides optimum isolation of the antenna port from the protected equipment port for maximum surge protection. LP-BTR surge protectors have exceptional RF performance and are constructed from the highest quality materials for unsurpassed durability and longevity. These units meet and surpass all applicable industry standards. The LP-BTR product family is available with N connector configurations to satisfy various installation requirements.

The IS-50 Series of DC block surge arrestors are designed to protect against lightning events and are ideal for HF, UHF and VHF radios. The IS-50 family of RF protectors can be used for general radio use with frequency ranges between 1.5 MHz to 1000 MHz.

Features

• Broad frequency ranges from 1.5 MHz to 1000 MHz
• Connectors: N-Type, F-Type and UHF
• High power versions capable to 2kW
• Industry leading surge rating of 20kA

The Telewave ANT450Y10-WR is a high performance directional antenna, designed especially for point to point as well as point to multipoint applications. This antenna produces 10 dBd forward gain with an excellent front-to-back ratio. Solid aluminum elements with 360° welds provide exceptional strength and prevent intermodulation. Each antenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and wind blown abrasives such as desert sand. The feed line is protected within the boom, and the radiating element is completely sealed against ice and other environmental hazards with a tough, RF transparent radome. The ANT450Y7-WR includes a welded vertical plate and mast clamp set. A horizontal plate is optional. The clamp set secures the antenna to a vertical mast or tower support from 1.5" - 3.5" O.D. For installations on angled supports, the "U" mount provides 3 separate planes of rotation to allow almost any required orientation of the antenna. The "U" mount attaches to virtually all supports up to 3.5" in diameter, and can be adapted to flat surfaces and utility poles.

The BMYD450K has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 10 dBd gain and operates in the 450-470 MHz range. The BMYD450K is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

450-470 MHZ 3-ELEMENT 7.1 DB GOLD ANODIZED YAGI ANTENNA N-FEMALE

450-470 MHZ 3-ELEMENT 7.1 DB SILVER SERIES YAGI ANTENNA N/F ***Minimum purchase required of 5pcs per order***

450-470 MHZ, 300 WATT, 10 DBD 7-ELEMENT HD YAGI, DIRECT-N

450-470 MHZ, 300 WATT, 6 DBD, 3 ELEMENT HD YAGI, DIRECT N

The Telewave ANT450Y7-WR is a high performance directional antenna, designed especially for point to point as well as point to multipoint applications. This antenna produces 7 dBd forward gain with an excellent front-to-back ratio.
Solid aluminum elements with 360° welds provide exceptional strength and prevent intermodulation. Each antenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and wind blown abrasives such as desert sand. The feed line is protected within the boom, and the radiating element is completely sealed against ice and other environmental hazards with a tough, RF-transparent radome.
The ANT450Y7-WR includes a welded vertical plate and mast clamp set. A horizontal plate is optional. The clamp set secures the antenna to a vertical mast or tower support from 1.5" - 3.5" O.D. For installations on angled supports, the "U" mount provides 3 separate planes of rotation to allow almost any required orientation of the antenna. The "U" mount attaches to virtually all supports up to 3.5" in diameter, and can be adapted to flat surfaces and utility poles.