Astron | RS7A 12VDC Output Table Top Power Supply, 7 Amp

Type THHN-THWN-2 building wire is intended for general purposeapplications and may be installed in conduit, duct, or otherrecognized raceways in wet (60°C oil/90°C water) or dry(105°C) locations. For both new work and rewiring applications,the smaller diameter of wire permits additional circuits or largerconductors to be installed in the conduit without exceeding maximumfill limitations. The insulation is a high quality, heat and moistureresistant polyvinyl chloride compound over which a heat and lightstabilized nylon jacket is tightly applied.

FEATURES
Sunlight Resistance, Gasoline and oil resistant II, VW-1 THWN-2 orTHHN or MTW (all sizes & colors), CT USE (1/0 and larger), C(UL)-Type /T90 or TWN 75, Lead Free-ROHS Compliant, 600V

Type THHN-THWN-2 building wire is intended for general purposeapplications and may be installed in conduit, duct, or otherrecognized raceways in wet (60°C oil/90°C water) or dry(105°C) locations. For both new work and rewiring applications,the smaller diameter of wire permits additional circuits or largerconductors to be installed in the conduit without exceeding maximumfill limitations. The insulation is a high quality, heat and moistureresistant polyvinyl chloride compound over which a heat and lightstabilized nylon jacket is tightly applied.

FEATURES
Sunlight Resistance, Gasoline and oil resistant II, VW-1 THWN-2 orTHHN or MTW (all sizes & colors), CT USE (1/0 and larger), C(UL)-Type /T90 or TWN 75, Lead Free-ROHS Compliant, 600V

3M™ Heat Shrink Tubing MFP is a cross-linked, thin-walled,heat-shrinkable tubing offering a high degree of mechanical strengthand high-temperature resistance. Fabricated from polyvinylidenefluoride, the tubing has outstanding abrasion resistance andcut-through properties in combination with high dielectric strength.It is inherently flame retardant, semi-rigid and highly resistant tomost industrial fuels, chemicals and solvents. When heated in excessof 347°F (175°C), MFP tubing rapidly shrinks to a skintightfit.

Adhesive-lined heat shrink tubing ideal for applications where bothexceptional flame retardancy and environmental sealing capabilitiesare required

Features:

Flame retardant

Superior sealing against water, moisture or other contaminants

Meets MIL - DTL - 23053/4 Class 3

Continuous Operating Temperature: -55°C to 125°C

Shrink Temperature: 120°C