Astron | RM20A-BB Rack Mount Pwr Supply 20 Peak w/Battery Back Up Modification

Type THHN-THWN-2 building wire is intended for general purposeapplications and may be installed in conduit, duct, or otherrecognized raceways in wet (60°C oil/90°C water) or dry(105°C) locations. For both new work and rewiring applications,the smaller diameter of wire permits additional circuits or largerconductors to be installed in the conduit without exceeding maximumfill limitations. The insulation is a high quality, heat and moistureresistant polyvinyl chloride compound over which a heat and lightstabilized nylon jacket is tightly applied.

FEATURES
Sunlight Resistance, Gasoline and oil resistant II, VW-1 THWN-2 orTHHN or MTW (all sizes & colors), CT USE (1/0 and larger), C(UL)-Type /T90 or TWN 75, Lead Free-ROHS Compliant, 600V

Type THHN-THWN-2 building wire is intended for general purposeapplications and may be installed in conduit, duct, or otherrecognized raceways in wet (60°C oil/90°C water) or dry(105°C) locations. For both new work and rewiring applications,the smaller diameter of wire permits additional circuits or largerconductors to be installed in the conduit without exceeding maximumfill limitations. The insulation is a high quality, heat and moistureresistant polyvinyl chloride compound over which a heat and lightstabilized nylon jacket is tightly applied.

FEATURES
Sunlight Resistance, Gasoline and oil resistant II, VW-1 THWN-2 orTHHN or MTW (all sizes & colors), CT USE (1/0 and larger), C(UL)-Type /T90 or TWN 75, Lead Free-ROHS Compliant, 600V

3M™ Heat Shrink Tubing MFP is a cross-linked, thin-walled,heat-shrinkable tubing offering a high degree of mechanical strengthand high-temperature resistance. Fabricated from polyvinylidenefluoride, the tubing has outstanding abrasion resistance andcut-through properties in combination with high dielectric strength.It is inherently flame retardant, semi-rigid and highly resistant tomost industrial fuels, chemicals and solvents. When heated in excessof 347°F (175°C), MFP tubing rapidly shrinks to a skintightfit.

Adhesive-lined heat shrink tubing ideal for applications where bothexceptional flame retardancy and environmental sealing capabilitiesare required

Features:

Flame retardant

Superior sealing against water, moisture or other contaminants

Meets MIL - DTL - 23053/4 Class 3

Continuous Operating Temperature: -55°C to 125°C

Shrink Temperature: 120°C

The SEC-1223BBM combines the reliability of our classic SEC-1223power supply with the reassurance of the BBM-1225 battery backupmodule. This combined unit automatically provides uninterrupted DCpower from an external backup battery (not included) to your criticalload in the event of an AC power outage. Once AC power is restored,the SEC-1223BBM will continue to seamlessly supply DC power to theload while providing a current limited charge to the backup battery(not included).

Features:

Advanced Switch ModeTechnology

Reliable, 12V Nominal DC Uninterruptible PowerSource (DC UPS) in conjunction with external 12V Lead Acid batterybackup circuit

High efficiency, compact and portable

Protected against short circuit, overload, over voltage and overtemperature

The RLP-4012 comes with a built-in meter that can monitor voltage andamperage by simply switching the Knob that is located to the right ofthe display (Note: the RLP-4012 can only monitor one input at atime). Along with a metered display the RLP comes with remote senseand remote control. The RLP-4012 has auto ranging input voltage from100 to 260 VAC and comes with four layers of protection shortcircuit, overload, over voltage, and over temperature.

Features:

Power Factor Correction

Auto Ranging Input voltage 100 to 260 VAC

Metering: Voltage / Amperage

Remote Sense / Remote Control

DC-OK TTL signal

Short Circuit / Overload / Over Voltage / Over TemperatureProtection

3 year warranty