Astron | ISO4812-24 Isolated DC/DC Converter 24Amp

Type THHN-THWN-2 building wire is intended for general purposeapplications and may be installed in conduit, duct, or otherrecognized raceways in wet (60°C oil/90°C water) or dry(105°C) locations. For both new work and rewiring applications,the smaller diameter of wire permits additional circuits or largerconductors to be installed in the conduit without exceeding maximumfill limitations. The insulation is a high quality, heat and moistureresistant polyvinyl chloride compound over which a heat and lightstabilized nylon jacket is tightly applied.

FEATURES
Sunlight Resistance, Gasoline and oil resistant II, VW-1 THWN-2 orTHHN or MTW (all sizes & colors), CT USE (1/0 and larger), C(UL)-Type /T90 or TWN 75, Lead Free-ROHS Compliant, 600V

Type THHN-THWN-2 building wire is intended for general purposeapplications and may be installed in conduit, duct, or otherrecognized raceways in wet (60°C oil/90°C water) or dry(105°C) locations. For both new work and rewiring applications,the smaller diameter of wire permits additional circuits or largerconductors to be installed in the conduit without exceeding maximumfill limitations. The insulation is a high quality, heat and moistureresistant polyvinyl chloride compound over which a heat and lightstabilized nylon jacket is tightly applied.

FEATURES
Sunlight Resistance, Gasoline and oil resistant II, VW-1 THWN-2 orTHHN or MTW (all sizes & colors), CT USE (1/0 and larger), C(UL)-Type /T90 or TWN 75, Lead Free-ROHS Compliant, 600V

3M™ Heat Shrink Tubing MFP is a cross-linked, thin-walled,heat-shrinkable tubing offering a high degree of mechanical strengthand high-temperature resistance. Fabricated from polyvinylidenefluoride, the tubing has outstanding abrasion resistance andcut-through properties in combination with high dielectric strength.It is inherently flame retardant, semi-rigid and highly resistant tomost industrial fuels, chemicals and solvents. When heated in excessof 347°F (175°C), MFP tubing rapidly shrinks to a skintightfit.

Adhesive-lined heat shrink tubing ideal for applications where bothexceptional flame retardancy and environmental sealing capabilitiesare required

Features:

Flame retardant

Superior sealing against water, moisture or other contaminants

Meets MIL - DTL - 23053/4 Class 3

Continuous Operating Temperature: -55°C to 125°C

Shrink Temperature: 120°C

The ICT206012-35AI2 converter is designed to operate from a negativeor positive ground electrical system, providing complete isolationbetween primary and secondary circuits, as well as from the chassis.The high efficiency design saves energy, incorporates extra inputfiltering and spike protection, and is vibration and moistureresistant. Flange mounting is standard. An extra contact is providedthat allows the converter to be turned on and off by a main orignition circuit, saving energy and battery life.