Trapper™ Lightning Arrestor

The Telewave ANT450Y7-WR is a high performance directional antenna,designed especially for point to point as well as point to multipointapplications. This antenna produces 7 dBd forward gain with anexcellent front-to-back ratio.
Solid aluminum elements with 360° welds provide exceptional strength and prevent intermodulation. Each antenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and wind blown abrasives such as desert sand. The feed line is protected within the boom, and the radiating element is completely sealed against ice and other environmental hazards with a tough, RF-transparent radome.
The ANT450Y7-WR includes a welded vertical plate and mast clamp set. A horizontal plate is optional. The clamp set secures the antenna to a vertical mast or tower support from 1.5" - 3.5" O.D. For installations on angled supports, the "U" mount provides 3 separate planes of rotation to allow almost any required orientation of the antenna. The "U" mount attaches to virtually all supports up to 3.5" in diameter, and can be adapted to flat surfaces and utility poles.

The Telewave ANT450Y10-WR is a high performance directional antenna, designed especially for point to point as well as point to multipointapplications. This antenna produces 10 dBd forward gain with anexcellent front-to-back ratio. Solid aluminum elements with 360°welds provide exceptional strength and prevent intermodulation. Eachantenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and environmental protection from corrosive gases, ultraviolet radiation, salt spray, acid rain andwind blown abrasives such as desert sand. The feed line is protectedwithin the boom, and the radiating element is completely sealedagainst ice and other environmental hazards with a tough, RFtransparent radome. The ANT450Y7-WR includes a welded vertical plateand mast clamp set. A horizontal plate is optional. The clamp setsecures the antenna to a vertical mast or tower support from 1.5" -3.5" O.D. For installations on angled supports, the "U" mountprovides 3 separate planes of rotation to allow almost any requiredorientation of the antenna. The "U" mount attaches to virtually allsupports up to 3.5" in diameter, and can be adapted to flat surfacesand utility poles.

The BMYD450K has been engineered to meet the requirements of a highgain, broadband, premium quality antenna. This antenna provides 10dBd gain and operates in the 450-470 MHz range. The BMYD450K ismanufactured using high strength 6061-T6 aluminum to withstand heavyice, high wind and other harsh conditions. All elements are welded tothe boom and the dipole design has an integral feed line welded tothe boom for extra strength and electrical conductivity. Thiseliminates misalignment or fastener problems. The entire antenna isanodized for appearance and corrosion resistance. A heavy duty clampis supplied which easily permits horizontal or vertical polarization.

450-470 MHZ 3-ELEMENT 7.1 DB SILVER SERIES YAGI ANTENNA N/F

450-470 MHZ, 300 WATT, 10 DBD 7-ELEMENT HD YAGI, DIRECT-N

450-470 MHZ, 300 WATT, 6 DBD, 3 ELEMENT HD YAGI, DIRECT N

Features:

Highly directional coverage and good front­to­back ratio

Rugged, reliable design

Stacked arrays

The Telewave ANT450F10 is an extremely rugged, high-gain, fiberglass collinear antenna, designed for operation in all environmental conditions. The antenna is con struct ed with brass and copper elements, connected at DC ground potential for lightning impulse protection. All junctions are fully soldered to prevent RF intermodulation, and each antenna is completely protected within a rugged, hightech radome to ensure survivability in the worst environments. The "Cool Blue" radome provides maximum protection from corrosive gases, ultraviolet radiation, icing, salt spray, acid rain, and wind blown abrasives. The ANT450F10 includes an ANTC482 dual clamp set for mounting to a 1.5" to 3.5" O.D. support pipe, and a 24" removable RG-213 N-Male jumper. Stand off and top mounts are also available.

LMR® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables