Laird External Antennas | Y4066 406-430 MHz 6-Element 10.2 dB Gold Anodized Yagi Antenna N/f

Trapper™ Lightning Arrestor

The Telewave ANT410Y10-WR is a high performance directional antenna,designed especially for point to point as well as point/ multipointapplications. This antenna produces 10 dBd forward gain with anexcellent front-to-back ratio.
Solid aluminum elements with 360° welds prevent intermodulation and provide exceptional strength. Each antenna is completely protected with our high-tech Txylan™ coating, which provides icing resistance and protection from corrosive gases, UV radiation, salt spray, acid rain and wind-blown sand. The feed line is protected within the boom, and the radiating element is completely sealed against ice and other hazards with a tough, RF-transparent radome.
The ANT410Y10-WR includes a welded vertical plate and mast clamp set. A horizontal welded plate is optional, or the ANTM400H adapter can be used. The clamp set fits any vertical mast or tower support from 1.5"-3.5" O.D. For installations on angled supports, the Universal mount option deletes the welded clamp, providing 3 separate planes of rotation and almost any required orientation.
The "U" mount attaches to virtually all supports up to 3.5" in diameter, and can be adapted to flat surfaces and utility poles.

LMR® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables

ROHN Tripod Roof Towers feature universal mast clamp and support bracket. They are compact folding for efficient storage and easy to install.

Additional features include:

Most Tripod Roof Towers "Snap-outs" fold tightly for convenient storage.

All Tripod Roof Towers feature the universal mast clamp capable of mounting up to 1-3/4" diameter mast.

All models feature a socket lock to hold the tightening bolt in place without turning.

Blt-on swivel feet adjust to most any pitch roof.

Installation is simple and fast by using lag screws in the base feet. This securely anchors the tower for long, trouble free service.

All Tripod Roof Towers feature a lower mast support bracket.

All models are Hot-Dip Galvanized for long lasting corrosion protection.

A prevailing torque lock-nut is used on bolt-on feet