Laird External Antennas | HS34-L 3/4" dia. Hole Saw, fits 3/8" Drill

without the ANTENEX® X-ACT™ Saw. The X-ACT™ Saw cuts a precise holein the vehicle mounting surface to allow the installation of industrystandard ANTENEX® 3/4” permanent hole mounts. This innovative, onepiece monolithic body design is machined from a single piece ofhardened steel. It will not disassemble on the job!

The X-ACT™ Saw features a replaceable self-centering pilot drill (HS34DB) that prevents dangerous “walking” of the saw and a replaceable hardened saw blade (HS34RB). The X-ACT™ also features a 1/8” depth limit that will prevent damage to the underlying headliner, yet it is deep enough to cut through thicker aluminum surfaces encountered onutility vehicles and ambulances.

The X-ACT™ Saw is designed for a 3/8” drill chuck and is nickel plated to guard the tool againstcorrosion. The X-ACT™ Saw may also be used in other applicationswhere a 3/4” hole is needed and depth is critical. Now in 3/8”also!

without the ANTENEX® X-ACT™ Saw. The X-ACT™ Saw cuts a precise holein the vehicle mounting surface to allow the installation of industrystandard ANTENEX® 3/4” permanent hole mounts. This innovative, onepiece monolithic body design is machined from a single piece ofhardened steel. It will not disassemble on the job!

The X-ACT™ Saw features a replaceable self-centering pilot drill (HS34DB) that prevents dangerous “walking” of the saw and a replaceable hardened saw blade (HS34RB). The X-ACT™ also features a 1/8” depth limit that will prevent damage to the underlying headliner, yet it is deep enough to cut through thicker aluminum surfaces encountered onutility vehicles and ambulances.

The X-ACT™ Saw is designed for a 3/8” drill chuck and is nickel plated to guard the tool againstcorrosion. The X-ACT™ Saw may also be used in other applicationswhere a 3/4” hole is needed and depth is critical. Now in 3/8”also!

Features:

All brass construction and gold plated contact design ensure themost corrosion resistance and best power transfer available

78 Rockwell Hardness brass material resists corrosion

Silver soldered ground lug and contact virtually eliminates RFnoise or static

Multiple cable options are available

Solid centerwire

Features:

All brass construction and gold plated contact design ensure themost corrosion resistance and best power transfer available

78 Rockwell Hardness brass material resists corrosion

Silver soldered ground lug and contact virtually eliminates RFnoise or static

Multiple cable options are available

NMO type brass and steel mount with large center button for higherdistributed capacitance and 3/4” hole installation.

After inventing the original NMO mount in the early 1970’s, Larsenhas continued to set the standard for MO antenna products. Antennasoperating above 1,700 MHz require a better match than the traditionalNMO mount can provide. To meet this requirement, we have redesignedour NMO mount to include a variety of innovative features.

Convert from low to high frequency applications and back simplyby pulling or replacing the center pin and insulator. The largercenter contact pin provides for additional strength against downwardcompression during low frequency installations, resulting in better low frequency VSWR.

High quality components: gold plated contact pin and conductors, zinc alloy body plated with copper and nickel, nickel plated brass ring and precision tooled body parts.

Fully sealed solder connections.