Times Microwave Systems

LMR®- FR is a non-halogen (non-toxic), low smoke, fire retardantcable designed for in-building runs that can be routed anywhereexcept air handling plenums. LMR-FR is UL/NEC & CSA rated "CMR" and"FT4" respectively, meets FAA FAR25 requirements and is MSHA-P formining applications.

Features:

-160 dBc PIM for optimal system performance

UL listed, type CMP (plenum) UL file #E-170516

Flat Braid outer conductor construction for optimal flexibility

Durable FEP outer jacket is suitable For both indoor and outdooruse

The LP-GPX-05-N high performance series is an exceptional DC passdesign for protection of GPS receivers requiring up to 5Vdc power tobe supplied on the center pin.

While the RF path is DC blocked, the biased DC voltage protectioncircuit uses Solid State protection technology to provide unsurpassedsurge performance. The LPGPX-05-N series offers outstanding InsertionLoss and Return Loss characteristics over the 1000-2000MHz band,making it suitable for protection of commercial and military GPS, aswell as other applications in this band.

Unlike competitive protectors, the white bronze platedconstruction of the LP-GPX-05-N series eliminates potential galvaniccorrosion issues and provides long life in hostile environments. Thefully weatherized housing is sealed to IP65 allowing for outdoor aswell as indoor installation.

The LP-GPX-05-N high performance series is an exceptional DC passdesign for protection of GPS receivers requiring up to 5Vdc power tobe supplied on the center pin.

While the RF path is DC blocked, the biased DC voltage protectioncircuit uses Solid State protection technology to provide unsurpassedsurge performance. The LPGPX-05-N series offers outstanding InsertionLoss and Return Loss characteristics over the 1000-2000MHz band,making it suitable for protection of commercial and military GPS, aswell as other applications in this band.

Unlike competitive protectors, the white bronze platedconstruction of the LP-GPX-05-N series eliminates potential galvaniccorrosion issues and provides long life in hostile environments. Thefully weatherized housing is sealed to IP65 allowing for outdoor aswell as indoor installation.

The LP-GPX-05-N high performance series is an exceptional DC passdesign for protection of GPS receivers requiring up to 5Vdc power tobe supplied on the center pin.

While the RF path is DC blocked, the biased DC voltage protectioncircuit uses Solid State protection technology to provide unsurpassedsurge performance. The LPGPX-05-N series offers outstanding InsertionLoss and Return Loss characteristics over the 1000-2000MHz band,making it suitable for protection of commercial and military GPS, aswell as other applications in this band.

Unlike competitive protectors, the white bronze platedconstruction of the LP-GPX-05-N series eliminates potential galvaniccorrosion issues and provides long life in hostile environments. Thefully weatherized housing is sealed to IP65 allowing for outdoor aswell as indoor installation.

Features:

Medium Antenna Feeder runs (no jumpers required)

Jumper Assemblies for 1-5/8" & 2-1/4" Feeders

Any appications (e.g.WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA,Mobile Antennas) requiring an easily routed low loss RF cable

Ideal for:

Jumper Assemblies in Wireless Communications Systems

Short Antenna Feeder runs

Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA,Mobile Antennas) requiring an easily routed, low loss RF cable

LMR®- FR is a non-halogen (non-toxic), low smoke, fireretardant cable designed for in-building runs that can be routedanywhere except air handling plenums. LMR-FR is UL/NEC & CSArated"CMR" and "FT4" respectively, meets FAA FAR25 requirements andis MSHA-P for mining applications.

LMR®-600 is a flexible, high performance, outdoor rated, 1/2"low-loss 50 Ohm coaxial cable. The use of Times X series connectors,WSB-600 boots and the CST-600 prep tool will insure a quick, rugged,reliable termination every time.

LMR® standard is a UV Resistant Polyethylene jacketed cabledesigned for 20-year service outdoor use. The bending and handlingcharacteristics are significantly better than air-dielectric andcorrugated hard-line cables.

LMR®- UltraFlex has a stranded center conductor and rubber outerjacket designed for multiple bending/ flexing cycles. It is used forboth indoor and outdoor applications. A wide variety of connectorsare available for LMR-600-UF cable, including all common interfacetypes, reverse polarity, and solder-on center pins. Most LMRconnectors employ crimp outer attachment using standard hex crimpsizes. LMR-600-UF cables are designed for outdoor exposure and have alife expectancy in excess of 10 years.

Times Microwave Systems introduces animproved series of plenum cables, LMR-LLPXto replace the LMR-LLPL series. The newplenum rated LMR-LLPX series cables have ared fluoropolymer jacket and will provide thesame attenuation as the orange PVC jacketedLMR-LLPL cables. The LMR-LLPX seriescables accept all standard Times Microwaveplenum connectors and can be prepped withthe easy to use CST strip tools. The LMRLLPXseries is offered in sizes 195 to 1200.
Features and Benefits

• Extended temperature range (-40°C to 125°C)
• Higher power handling
• Higher Oxygen Index jacket for improved plenum flame and smokeperformance
• Lower coefficient of friction for easier installations
• Better cut-through and abrasion resistance
• Advanced chemical resistance and overall UV resistance

LMR®-240 is a flexible, high performance, outdoor rated, 1/4"low-loss 50 Ohm coaxial cable. The use of Times X series connectors,WSB-240 boots and the CST-240A prep tool will insure a quick, rugged,reliable termination every time.