The Extreme Weather RET assembly is an integrated design where theconnector and the cable are fused into one assembly, making thissolution highly resistant to moisture, contamination, andcorrosion.

• The ONLY IP 68 rated RET connector available today
• A fused gasket sealed body will eliminate the chance of moisturerunning down the cable and seeping into the connector
• Gasket encapsulated contacts and gasket sealed mating face willeliminate the chance of moisture seeping into the connector

Kaelus world-proven outdoor solutions provide strong RFperformancecoupled with rugged operation. The DBC0062 combines AWS, 1900,WCS and 2600 bands onto a single feeder and provided the followingfeatures:

• AWS 3 and AWS 4 ready
• Enables feeder sharing of various technologies
• Low insertion loss and high isolation
• Field configurable DC switch.
• Low passive IM performance

The Kaelus DBC0114 is a bi-directional Diplexer, designed to combine or split 1900 and AWS/WCS bands. The DBC0114 provides low insertion loss and high return loss with excellent passive inter-modulationperformance in an extremely small and lightweight IP67 capablepackage

• Enables antenna sharing for 1900 and AWS/WCS networks
• AWS-3 ready
• Offers low insertion loss
• Low passive IM performance
• Wall or mast mounting
• Single and twin models available

Designed to be deployed in co-located AWS, PCS1900 and low band(698-960) systems with wideband antennas, the Kaelus TMA2093provides internal duplexing in all three bands with uplink gain inthe highbands. A passive Tx/Rx path is provided to a low-band antenna port,thereby saving capital expenditure and tower leasing fees.

• Improved base station sensitivity through gain in the AWS andPCS uplink bands
• Excellent noise figure performance
• Internal duplexing of 698-960MHz signals to be passed toadditional ANT ports
• AISG2.0 compatible, hardware & software configuration usingAISG "personality" upload
• Internal duplexing of AWS and PCS bands
• DC/AISG bypass onto low band main (optional)

Designed to combine two 1900MHz base stations, the Kaelus DBC0099provides a low loss combiner with excellent insertion loss andpassiveinter-modulation performance.

• Combines two 1900MHz BTS onto a single feeder without guardband
• Designed for low passive inter-modulation
• DC/AISG bypass field settable
• Very low insertion loss

The Extreme Weather RET assembly is an integrated design where theconnector and the cable are fused into one assembly, making thissolution highly resistant to moisture, contamination, andcorrosion.

• The ONLY IP 68 rated RET connector available today
• A fused gasket sealed body will eliminate the chance of moisturerunning down the cable and seeping into the connector.
• Gasket encapsulated contacts and gasket sealed mating face willeliminate the chance of moisture seeping into the connector.

Fixed bracket included

• Innovative Ultra Wide Band Slotted Disc Antenna Technology
• Supports MIMO: 2x2 on Low Band and 4x4 on High Band
• Suitable for Stadium and Street Cell Applications

Designed to be deployed in 2300MHz WCS Band, the Kaelus TMA2104provides gain at the 2300MHz uplink band while allowing 700/850services to pass through to the antenna. This saves OPEX, CAPEX and gives excellent system performance as well as full AISGcapabilities.

• Improved base station sensitivity through gain in 2300 MHz bands
• Hardware and software configuration using AISG "Personality"upload
• High linearity and low noise performance
• Fail safe bypass mode with lightning protection
• bypass provided for 700/850 MHz services

The Extreme Weather RET assembly is an integrated design where theconnector and the cable are fused into one assembly, making thissolution highly resistant to moisture, contamination, andcorrosion.

• The ONLY IP 68 rated RET connector available today
• A fused gasket sealed body will eliminate the chance of moisturerunning down the cable and seeping into the connector.
• Gasket encapsulated contacts and gasket sealed mating face willeliminate the chance of moisture seeping into the connector.

The KA-6008-8433 is an interference mitigation filter tunable totwo different positions: when set to position one, it rejectsinterference in the Satellite Communication Band (3820-3980MHz) bandwhile passing 3700-3760MHz (A1/A2/A3 Block). When the SatelliteCommunication Band is vacated, the filter can be reconfigured toposition two to pass 3700-3980MHz (A, B and C block). The change ofconfiguration can be performed remotely via AISG. Capable of beingused in an outdoor environment, the KA-6008-8433 contains eightidentical filters, suitable for 8x8 MIMO configuration, offeringexcellent insertion loss and rejection.

• Remote tunable filter set to 2 positions: position one, passingA1/A2/A3 block only, mitigates interference in the SatelliteCommunication band and position two allows the full 3.7GHz (A, B andC block) spectrum use, once the Satellite Communication band has beenvacated.
• Low insertion loss
• Outdoor and indoor configurations
• 8 in, 8 out configuration suitable for 8x8 MIMOconfiguration