CSI

Alarm annunciation of each active element in the system can bemonitored at the fire control room or wherever needed through aremoteannunciator and via the alarm relay outputs on the BDA. Our remoteannunciators are compact and can be housed in a typical 2 gangelectrical box and interconnected with a single standard CAT5 cableup to 650 feet away, providing a compact and clean solution formonitoring the health of each active DAS element.

• Provides remote annunciation of alarms
• Compact, unobtrusive design
• Operates up to 650 feet (200 meters from BDA)
• Includes audible annunciation
• Uses single CAT5 cable

Directional couplers are unequal splitters that are used tobalanceout the RF power within a distributed antenna system. They area perfect fit for the server side of a distributed antenna system,or to couple another signal source (suchas a cellular modem) intothe donor coax.

These Low PIM coaxial directional couplers feature a low throughloss and power handling capability of 200 watts average power.Directional couplers have the added benefit of low VSWR on allports plus they provide isolation on the reverse path to assurereturn path signalquality.

A termination or load is a dissipative electronic device used at the end of a transmission line or waveguide to convert transmittedenergy into heat, so that essentially no energy is radiated outwardor reflected back to its source.

These terminations are ideally suited for a variety ofapplications including testing, accurate measurement, and to terminate an unused port in an in-building system.

A termination or load is a dissipative electronic device used atthe end of a transmission line or waveguide to convert transmittedenergy into heat, so that essentially no energy is radiated outwardor reflected back to its source.

These terminations are ideally suited for a variety of applicationsincluding testing, accurate measurement, and to terminate anunused port in an in-building system.

Westell's 80 Watt attenuator is designed to attenuate, weaken thepower that is supplied by a source to a level that is suitable fortheconnected load.

Westell's passive attenuator reduces the amount of power beingdelivered to the connected load by a single fixed amount.

A termination or load is a dissipative electronic device used atthe end of a transmission line or waveguide to convert transmittedenergy into heat, so that essentially no energy is radiated outwardor reflected back to its source.

These terminations are ideally suited for a variety ofapplicationsincluding testing, accurate measurement, and to terminate anunused port in an in-building system.

A termination or load is a dissipative electronic device used atthe end of a transmission line or waveguide to convert transmittedenergy into heat, so that essentially no energy is radiated outwardor reflected back to its source.

These terminations are ideally suited for a variety ofapplicationsincluding testing, accurate measurement, and to terminate anunused port in an in-building system.

Product Highlights

• Integrated BBC Cabinet greatly simplifies installation
• NEMA3R
• Supports up to 160AH of battery @ 24VDC
• Wall Mount

Directional couplers are unequal splitters that are used tobalance out the RF power within a distributed antenna system. They area perfect fit for the server side of a distributed antenna system,or to couple another signal source (suchas a cellular modem) intothe donor coax.

These Low PIM coaxial directional couplers feature a low throughloss and power handling capability of 200 watts average power.Directional couplers have the added benefit of low VSWR on allports plus they provide isolation on the reverse path to assurereturn path signalquality.

Directional couplers are unequal splitters that are used tobalance out the RF power within a distributed antenna system. They area perfect fit for the server side of a distributed antenna system,or to couple another signal source (suchas a cellular modem) intothe donor coax.

These Low PIM coaxial directional couplers feature a low throughloss and power handling capability of 200 watts average power.Directional couplers have the added benefit of low VSWR on allports plus they provide isolation on the reverse path to assurereturn path signalquality.

Westell's 80 Watt attenuator is designed to attenuate, weaken thepower that is supplied by a source to a level that is suitable fortheconnected load.

Westell's passive attenuator reduces the amount of power beingdelivered to the connected load by a single fixed amount.