Intelligent 1U Power Shelf with Single-Breaker Battery Management Module and 24VDC 700W DC Converter Module (+48/24V)

The RU1-2024 has a universal AC input and full range. These units have a high efficiency of up to 89 percent. The operating temperature for these units is -40 C to over 70 C with a built-in cooling fan. All of the RU1 series come with at least three layers of protection from short circuit, overload, over voltage, and over temperature.

Features:

Universal AC input/Full Range

TTL remote control Remote control

High efficiency up to 89%

Operating Temperature Range: -20°C~ +60°C (Built-in cooling fan)

Protection: Short Circuit / Overload / Over Voltage / Over Temperature

Intelligent 2U Power System with Dual-Breaker Battery Management Module, 24VDC 700W DC Converter Module and two Load Distribution Modules (-48V)

The RLP-4024-BBSCLVD is a Heavy Duty AC to DC Power Supply. It comes with a power factor correction with metering voltage and amperage. All of the RLP-BBSCLVD come with three layers of protection against overload, over voltage, over temperature, and short circuit protection. This model also comes with a new manual battery disconnect switch.

Features:

Power Factor Correction

Selectable Input Voltage 110 or 220 VAC

Metering:Voltage / Amperage

Short Circuit / Overload / Over Voltage / Over Temperature Protection

Manual Battery Disconnect Switch "NEW"

RLP-4024BBSCLVD is continuous dity 28.0 VDC output

3 year warranty

The ICT Modular Power Series provides N+1 redundancy with 700 watt hot swappable 24 volt power module. The power shelf can accomodate one to four power modules and one or two accessory modules. A dedicated slot holds the optional Intelligent Control Module for full TCP/IP remote monitoring and control. When combined with the optional Battery Management Module, the Intelligent Control Module also provides advanced battery functions including battery state of charge, estimated run time remaining, and battery discharge testing.

he RU1-1024 has a universal AC input and full range. These units have a high efficiency of up to 89 percent. The operating temperature for these units is -40 C to over 70 C with a built-in cooling fan. All of the RU1 series come with at least three layers of protection from short circuit, overload, over voltage, and over temperature.

Features:

Universal AC input/Full Range

Remote Sense DC-OK TTL signal & TTL remote control

High efficiency up to 89%

Operating Temperature Range: -40°C~ +70°C (Built-in cooling fan)

Protection: Short Circuit / Overload / Over Voltage / Over Temperature

N+1 Power System with Battery Backup
Features

Voltage/Ampere meter

Module status LEDs, fault indicator LEDs and fault alarm are standard features on all models

Highly regulated output voltage

Short circuit protection and overload current

25 pin D-sub connector for remote monitoring system

WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.

The RM-2524 is an economical and reliable modular 2U rack mount AC to DC power supply comprised of two modules. This long tested configuration allows for the failure of one modules with out interruption of power provided to the load dependent on current draw. All RM series power supplies are wired in a floating ground configuration.

The Pro Series line of DC power supplies is a high performance, cost effective, high efficiency 1RU DC power supply designed for a variety of mission-critical applications. The core of the Pro Series is derived from the state-of-the-art ICT Digital Series power supply design that delivers high efficiency, power factor corrected AC input, space-saving 1RU chassis, FCC Class B low noise rating, and an optional battery backup terminal with integrated low voltage disconnect.

The Pro Series line of DC power supplies is a high performance, high efficiency 1RU DC power supply with no compromises. The core of the Pro Series is derived from the state-of-the-art ICT Digital Series power supply design that delivers high efficiency, power factor corrected AC input, space-saving 1RU chassis, FCC Class B low noise rating, and an optional battery backup terminal with integrated low voltage disconnect.

ICT Pro Series DC power supplies provide 690 watts of power with 12, 24 or 48VDC output. They provide an ideal DC power solution for wireless communications professionals who demand cost effective, high efficiency space-saving DC power systems for LMR, broadband, and network communications equipment including radios, repeaters, trunking systems, paging systems, RF amplifiers, microwave, WiMax, routers, bridges, multiplexers, and VOIP. The Pro Series is also ideal for industrial power applications such as security systems, transportation, process control, and DC in-building power.

690 watts of output power in a 1RU rack mount chassis.

90 to 93% efficiency over a broad power range (230VAC input).

Wide-ranging power factor corrected AC input saves energy.

Form C alarm and remote shutdown contacts.

Optional battery backup with integrated low voltage disconnect for charging and protecting batteries.

The RMF-2024 has an auto range voltage input of 90 to 264 VAC, with 63 Hz or 120 to 370 VDC. This unit comes with three available outputs that are adjustable; these outputs are available in 12, 24, and 48 VDC. All RMF devices have a built-in TTL remote control and remote sense along with a DC-OK TTL signal, along with short circuit, over load, over voltage, over temperature protections, and hold UL, CE, TUV, CUL approvals.

Features:

Auto range voltage input 90 ~ 264 VAC, 47 ~ 63 Hz or 120 ~ 370 VDC

Available in 12, 24, 48 VDC output (adjustable)

Built-in TTL remote control / remote sense

DC-OK TTL signal

Short circuit / over load / over voltage / over temperature protections

Approvals: UL, CE, TUV, CUL (Modules)